100T3200 Press brake with DA-52S Motorized CNC crowning
You are here: Home » Showroom » Video Gallery » Press Brake » 100T3200 Press brake with DA-52S Motorized CNC crowning

100T3200 Press brake with DA-52S Motorized CNC crowning

Views: 94     Author: Site Editor     Publish Time: 2018-05-24      Origin: Site Inquire

Features

Standard Equipment:

●Height adjustable and movable sliding front support arms.

●DELEM DA52s CNC controller with PC-Profile-T software.

●Promecam easy clamping system.

●410 mm throat depth.

●3 plus 1 axis CNC:

-Y1, Y2 precision ram positioning.

-X precision servo-driven back gauge. 

-Motorized adjustable R, manual Z1, Z2-axis. 

-CNC motorized wave crowning.

●2 back gauge fingers

●Covers for cylinders and top beam

●Top and bottom tools are surface hardened by special treatment.

●CNC controlled strong X=800 mm back gauge

●Foot pedal is produced according to CE standards and suitable for single and multiple bends.

●2 photocells are placed facing each other for rear guard.

●Preadjusted electrical requirements based on customer’s geographical area.

●Electrical panel with cooling system designed to meet CE standards & composed of automation and electrical equipment with SIEMENS branding.


The bending machine is a machine that can bend thin plates. Its structure mainly includes a bracket, a worktable and a clamping plate. The worktable is placed on the bracket. The worktable is composed of a base and a pressure plate. The base is composed of a seat shell, a coil and a cover plate, the coil is placed in a recess of the seat shell, and the top of the recess is covered with a cover plate. When in use, the coil is energized by the wire, and after the electricity is energized, a gravitational force is generated on the pressure plate, so as to realize the clamping of the thin plate between the pressure plate and the base. Due to the use of electromagnetic force clamping, the pressing plate can be made into various workpiece requirements, and the workpiece with side walls can be processed, and the operation is also very simple.


Introduction of CNC bending machine

The bending machine is to use the equipped mold (general or special mold) to bend the cold metal sheet into workpieces with various geometric cross-section shapes. The bending machine generally adopts a special CNC system for the bending machine. The coordinates of the bending machine The axis has been developed from a single axis to 12 axes, and the CNC system can automatically realize the sliding depth control, the left and right tilt adjustment of the slider, the front and rear adjustment of the rear stopper, the left and right adjustment, the pressure tonnage adjustment and the slider approaching working speed adjustment, etc. . The bending machine can easily realize the actions of the slider downward, jog, continuous, pressure maintaining, return and stop in the middle, and complete the bending of multiple elbows with the same angle or different angles at one time.


Video

Get A Quote

Home

Copyright  2023 Nanjing Harsle Machine Tool Co. Ltd. All rights reserved.