40-ton Electric Power Press, Mechanical punching machine for sale

40-ton Electric Power Press, Mechanical punching machine for sale. The design principle of the punch press is to convert circular motion into linear motion. The main motor generates power to drive the flywheel, and the clutch drives the gear, crankshaft, connecting rod, etc., to achieve the linear motion of the slider. The movement from the main motor to the connecting rod is Circular motion.

Between the connecting rod and the slider, there needs to be a transition point for circular motion and linear motion. There are roughly two mechanisms in its design, one is ball type, the other is pin type, through which circular motion is converted into slider Linear motion. The punch presses the material to plastically deform it to obtain the required shape and precision. Therefore, it must be matched with a set of molds, the material is placed in between, the machine applies pressure to deform it, and the force applied to the material during processing The resulting reaction force is absorbed by the punch machine body.

● With an inclinable cast structure, the machine body can incline to allow a punched work-piece or waste material to slide down from the die.

● With a rigid turn-key clutch, the press has single or continuous operation standards.

● The punch press uses a single type brake. The sliding block is equipped with a press-down type safety device that can be pressed down to protect the entire machine.

● Avoid being damaged in case of overpressure.

● The machine has the advantages of high universality, high precision, reliable performance and convenient operation.