Views: 47 Author: Site Editor Publish Time: 2020-09-17 Origin: Site
JE23-40T mechanical eccentric punching machine with pneumatic clutch and stroke adjustment for sale. A punch is a punching press. In national production, the stamping process saves materials and energy compared with traditional machining, has high efficiency, does not require high technical requirements for operators, and can make products that cannot be achieved by machining through various mold applications. Its uses are getting wider and wider.
Stamping production is mainly for sheets. Through the die, blanking, punching, forming, deep drawing, trimming, fine blanking, shaping, riveting and extrusion parts can be made, which are widely used in various fields. Such as the switches and sockets we use, cups, cupboards, dishes, computer cases, and even missile aircraft... There are many accessories that can be produced by punching through molds.
● Stroke adjustment on crankshaft
● Dry type pneumatic friction clutch
● Inching and cycle working mode
● Foot switch and double-button control
● Ram can stop at any position immediately
| No. | Item | Unit | JE23-40T |
| 1 | Nominal force | KN | 400 |
| 2 | Nominal stroke | mm | 4 |
| 3 | Slide stroke | mm | 20-120 |
| 4 | SPM | Time/min | 70 |
| 5 | Max die Height | mm | 220 |
| 6 | Die height adjustment | mm | 80 |
| 7 | Between slide center and frame | mm | 250 |
| 8 | Bolster(F.B*L.R) | mm | 480*710 |
| 9 | Bolster opening(up dia*depth*low dia) | mm | φ200*φ25*φ180 |
| 10 | Bolster Thickness | mm | 80 |
| 11 | Bed opening(Dia*F.B*L.R) | mm | 220*220 |
| 12 | Slider Area(F.B*L.R) | mm | 270*320 |
| 13 | Shank hold(Dia*depth) | mm | φ50*70 |
| 14 | Between columns | mm | 410 |
| 15 | Main motor power | kw | 4 |
| 16 | Outline Dimension(F.B*L.R*H) | mm | 1620*1450*2350 |
| 17 | Net Weight | kg | 3286 |
English
Pусский
