Advantages of Closed-type Laser Cutting Machine

The laser cutting machine is to focus the laser emitted from the laser into a high power density laser beam through the optical path system. The laser beam is irradiated on the surface of the workpiece to make the workpiece reach the melting point or boiling point, while the high-pressure gas coaxial with the beam blows the molten or vaporized metal away.

With the movement of the relative position of the beam and the workpiece, the material is finally formed into a slit, so as to achieve the purpose of cutting.

Laser cutting process replaces the traditional mechanical knife with invisible beam. It has the characteristics of high precision, fast cutting, not limited to cutting pattern, automatic typesetting to save materials, smooth incision, low processing cost, etc. It will be gradually improved or replaced in Traditional metal cutting process equipment. The mechanical part of the laser cutter head has no contact with the workpiece, and will not scratch the surface of the workpiece during work; the laser cutting speed is fast, the incision is smooth and flat, and generally does not require subsequent processing; the cutting heat-affected zone is small, the plate deformation is small, and the slit is narrow; The incision has no mechanical stress and no shearing burrs; high machining accuracy, good repeatability, and no damage to the surface of the material; CNC programming can process any plan, and can cut the entire board with a large format without opening a mold, which is economical and time-saving.

Surrounding laser cutting machine is the mainstream model on the market, with the following advantages:

Prevent Laser Damage to People's Eyes

In the international classification of lasers, the lasers that can be used for cutting generally belong to Class III or Class IV lasers, which not only prohibit direct viewing, but also the power of scattered light should not be underestimated. Novices like to stare at the cutting head when operating the laser cutting machine, which will cause damage to the eyes and a tingling sensation for a long time.

In addition, the laser has good monochromaticity, and the chromatic aberration in the fundus is small. Very low laser energy irradiation can cause damage to the cornea or retina.

The laser cutting machine with the enclosed structure can isolate the laser from the operator to the greatest extent. After the parameters are adjusted and the cutting sample reaches the standard, the side sliding door of the cutting machine can be closed to perform a fully enclosed cutting to avoid the damage caused by the laser to the human body.

Prevent Smoke and Dust from Harming People

Laser cutting is thermal cutting, and a lot of smoke and dust will be generated during the cutting process. Although laser cutting machines are generally equipped with dust extraction devices, some of the smoke and dust will inevitably escape, causing pollution to the working environment and harm to the operator's body.

The enclosed structure of the enclosed laser cutting machine makes the escaping smoke and dust to be negligible or even negligible.

Prevent Mechanical Damage

Although the laser cutting machine uses a laser instead of a blade as a processing tool, the probability of causing mechanical damage has been greatly reduced, but it is still not 100% guaranteed that there will be no accidents. The surrounding laser cutting machine completely isolates the processing structure, processing material, conduction device, etc. from the operator, which minimizes the risk of possible accidents.

Even if there are many advantages, when operating the surround laser cutting machine, it is necessary to strictly abide by various specifications, such as wearing goggles, dust masks, gloves, etc. Production safety first, keep in mind at this moment.