 +86-18052080815  |   info@harsle.com
Blog
You are here: Home » Blog

Blog

2021
DATE
06 - 09
A press brake is a machine pressing tool for bending sheet and plate material, most commonly sheet metal. It forms predetermined bends by clamping the workpiece between a matching punch and die.
Read More
2021
DATE
06 - 01
The hydraulic shearing machine is a kind of machine that uses a reasonable blade gap to apply shearing force to metal plates of various thicknesses using a moving upper blade and a fixed lower blade so that the plates can be broken and separated according to the required size.
Read More
2021
DATE
05 - 25
The press brake mold is a tool used by the bending machine to form and process sheet materials. This tool is composed of various parts, and different molds are composed of different parts.
Read More
2021
DATE
05 - 18
The basic principle of rolling is shown in the figure below. If the blank is placed on the lower roller at rest, its lower surface is in contact with the highest points b and c of the lower roller, and the upper surface is in contact with the lowest point a of the upper roller.
Read More
2021
DATE
05 - 11
Sheet metal bending mainly uses bending machines to bend the sheet metal in a straight line, which is suitable for processing narrow and long linear parts. The bending operation of the bending machine is completed by the upper and lower bending dies fixed on the sliding block and the table.
Read More
2021
DATE
05 - 03
Shearing :A shear force is applied that will cut off part of a sheet. The cut off ‘blank’ becomes the workpiece.Shearing, also known as die cutting, is a process which cuts stock without the formation of chips or the use of burning or melting. In strict technical terms, the process of “shearing” .
Read More
2021
DATE
04 - 13
The process of bending a blank into a certain angle or a certain shape with mechanical equipment and tools is called mechanical bending. According to the different types of bending equipment and processed materials, mechanical bending can be divided into sheet metal stamping and bending
Read More
2021
DATE
03 - 25
Manual bending of sheetsThere are many bending processing methods for sheet metal. Manual bending refers to the processing of bending sheet metal parts using simple tools and manual operations, which mainly include the bending and hemming of thin sheets.
Read More
2021
DATE
03 - 18
When the roll board is designed, one of the most important factors is the material of the material.
Read More
  • Total 88 pages  Go to Page
  • Go

Home

Copyright  2021 Nanjing Harsle Machine Tool Co. Ltd. All rights reserved.