Views: 35 Author: Site Editor Publish Time: 2023-04-18 Origin: Site
China Factory J21S-80T Sheet Hole Punch Press Manufacturer. A punch is a punching press. In national production, the stamping process saves materials and energy compared with traditional machining, has high efficiency, does not require high technical requirements for operators, and can make products that cannot be achieved by machining through various mold applications. Its uses are getting wider and wider.
Stamping production is mainly for sheets. Through the die, blanking, punching, forming, deep drawing, trimming, fine blanking, shaping, riveting and extrusion parts can be made, which are widely used in various fields. Such as the switches and sockets we use, cups, cupboards, dishes, computer cases, and even missile aircraft... There are many accessories that can be produced by punching through molds.
● Deep throat type design can put large size stamping mold and work with larger working area compared with common power press machine.
● With a rigid turn-key clutch, the press has single or continuous operation standards.
● The punch press uses a single type brake. The sliding block is equipped with a press-down type safety device that can be pressed down to protect the entire machine.
● Avoid being damaged in case of overpressure.
● The machine has the advantages of high universality, high precision, reliable performance and convenient operation.
| No. | Item | Unit | J21S-80T | |
| 1 | Nominal Force | KN | 800 | |
| 2 | Throat Depth | Mm | 500 | |
| 3 | Slide Stroke | mm | 115 | |
| 4 | Slipper Stroke Times | times/min | 45 | |
| 5 | Shut Height | mm | 140 | |
| 6 | Shut Height Adjustable | mm | 60 | |
| 7 | Column Distance | mm | 360 | |
| 8 | Table Size | mm | 500*750 | |
| 9 | Table Thickness | mm | 90 | |
| 10 | Motor Power | KW | 7.5 | |
| 11 | Slide bottom size | Front and Back | mm | 250 |
| Left and Right | mm | 300 | ||
| 12 | Weight | kg | 4800 | |
| 13 | Dimension | mm | 1790*1300*2600 | |
English
Pусский
