Views: 44 Author: Site Editor Publish Time: 2018-12-06 Origin: Site
●Excellent beam quality: focus spot is smaller, cutting line is finer, work efficiency is higher, processing quality is better.
●Very high cutting speed : 2 times the same power CO2 laser cutting machine.
●Extremely high stability using the worlds top imported fiber laser, the performance is stable, and the life of key components can be up to 100 thousand hours.
●Extremely high electro-optical conversion efficiency: fiber laser cutting machine is 3 times higher than CO2 laser cutting machine for optical conversion efficiency, energy saving and environmental protection.
●Extremely low use cost : the power consumption of the whole machine is only 20-30% of the samekind of CO2 laser cutting machine.
●Very low maintenance cost : no laser working gas ; optical fiber transmission without reflector , savinga lot of maintenance costs.
●Product operation and maintenance convenience : optical fiber transmission , no need to adjust the optical path.
●Super flexible light guide effect, compect size, compact structure, easy to flexible processing requirements.
●The professional laser cutting machine CNC control system , the computer operation , can guaranteethe cutting quality , causes the cutting work to be more convenient , the operation is simpler.
●The machine tool gantry style structure , casting bed and cross beam aluminum alloy can withstandhigher speed and acceleration.
●To exchange worktable configuration , shorten standby time , and effectively increase work efficiencyby more than 30%.
●The machine adopts imported AC servo system drive and imported transmission system . Themachine tool movement mechanism adopts the imported gear and rack drive and the linear guiderail , so as to ensure the high speed high precision and high reliability of the equipment.
●The rack and guide rail adopt a fully sealed protective device to prevent oil free friction movementand dust pollution , improve the service life of the transmission parts and ensure the precision of themachine tool movement.
●The laser cutting head is equipped with the non-contact height tracking system of the inletcapacitance , which is sensitive and accurate , avoids the collision between the cutting head and theprocessing board , and ensures the position of the cutting focus , and ensures the stability of thecutting quality.
●The laser cutting head can bear the pressure of 2 . 0mpa gas , and the high-pressure gas pathequipment improves the cutting ability of hard cutting materials such as stainless steel.
●The machine has automatic partition smoke exhaust system good smoke exhaust effect and littlepollution.
 ●High electro-optical conversion efficiency. ●Customized output fiber length. ●QBH connector. ●Maintenance-free operation. ●Wide modulation frequency range. ●Small size , easy to install. |
| Optical parameters | Unit | RFL-C500 |
| operation mode | CW/Modulate | |
| Central radiation wavelength | mm | 1080±5 |
| Standard output power | W | 1000 |
| Beam quality | ㎡ | 1.3 |
| Working temperature | °C | 10-40 |
| Input voltage | V | 380 |
| Power | Kw | 4 |
| Power adjustable range | % | 10-100 |
| Cooling method | Water cooling | |
| Control mode | Rs232/AD/Terminal | |
| Red laser | Yes | |
| Size(W*D*H) | mm | 485*240*765 |
| Weight | kg | 50 |
| Item | Fiber laser | CO2 | Disc laser |
| wall=plug efficiency | 30% | 10% | 15% |
| Maximum output power | 50kw | 20kw | 8kw |
| BPP(4/5KW) | ＜2.5 | 6 | 8 |
| Semiconductor pump life | ＞100000 | NA. | 10000 |
| Area covered(4/5kw) | ＜1 Square meter | 3Square meters | ＞4Square meter |
| Maintain | No need | Need | Often |
| Flexible machining | Very suitable | Unsuitable | Suitable |
| Stability | Optimum | Good | Good |
| Absorptivity %--steel | 35 | 12 | 35 |
| Absorptivity%--aluminnum | 7 | 2 | 7 |
The cooling system of the fiber laser is matched with the water cooling system . The temperature ofthe refrigeration unit is shown by the digital table.The refrigerating unit will automatically refrigeratewhen the water temperature exceeds thespecified temperature . The refrigeration unit wilautomatically stop cooling when the water temperature is below the specified temperature , and it hasthe electric heating function.
The water system of the optical fiber laser cutting machine mainly consists of two parts: one part is the cooling water coming out from the cold water unit and entering the laser in two ways. One way into the main part of the laser, cooling it, cooling it all the way into the electronic control box of the laser, andreturning to the cold water machine after the loop.
| No. | Equipment model | HS-1000W-3015 |
| 1 | Type of laser | Fiber laser |
| 2 | Laser working medium | YVO4 |
| 3 | Laser wavelength | 1070mm |
| 4 | Rated output power | 1000W |
| 5 | Beam quality | ＜0.373mrad |
| 6 | X axis stroke | 1500mm |
| 7 | Y axis stroke | 3000mm |
| 8 | Z axis stroke | 120mm |
| 9 | Effective cutting rang | 1500*3000mm |
| 10 | Axial orientation precision of worktable | ≤±0.03mm/m |
| 11 | Repeatable positioning accuracy of worktable | ≤±0.03mm/m |
| 12 | Maximum load-bearing capacity speed | 120m/min |
| 13 | Maximum load-bearing capacity of worktable | 1500KG |
| 14 | Phase number | 3 |
| 15 | Rated voltage of power supply | 380V |
| 16 | Current frequency | 50Hz |
| 17 | Total power protection level | IP54 |
| 18 | Dimension | 3500*2900*1900mm |
| 19 | Weight | 4500kg |
English
Pусский
