How to adjust after the turret punching machine

First,  look at the position and structure of the turret mold.

The distance between the punch core and the stripper plate is 0.5~2mm, and the total length of the punch is 209~210mm. The length of the punch must be re-adjusted after it has worn out.  After adjusting the length of the 80-type punch, if the return spring is too loose, it is necessary to add a spacer.

Lower die: The correct height of the lower die is 30±0.5mm. If the size is wrong after sharpening, it can be adjusted by adding a gasket.