How to design a two-machine linkage bending machine
You are here: Home » Support » Blog » How to design a two-machine linkage bending machine

How to design a two-machine linkage bending machine

Views: 52     Author: Site Editor     Publish Time: 2021-01-27      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

●Structural design

⒈A dual-machine linkage bending machine includes a first bending machine and a second bending machine. Each bending machine is provided with a worktable, and a lower mold is fixed on the worktable. Side plates are provided at both ends, and the working table and the lower die on the first bending machine extend outside the side plate on one side and extend to the inside of the side plate of the second bending machine. The stage and the lower mold are joined together.


⒉Since the end surfaces of the workbench and the lower die are finished surfaces, the joints at the joints of the workbench and the lower die of the first and second bending machines can be made small, below 1mm, the two machines work in linkage When the sheet metal is bent at the joint of the lower molds of the two bending machines, the bending accuracy is high, and there is no special-shaped transition zone; the utility model is particularly suitable for bending sheet materials with a length greater than the width of a single bending machine.


●Description of the drawings

bending machinebending machine

It is a two-machine linkage bending machine, including the first bending machine 2 and the second bending machine 4. Each bending machine is equipped with a worktable, and the lower mold is fixed on the worktable. The two ends of each bending machine With a side plate 3, the worktable 5 and the lower die 6 on the first bending machine 2 extend outside the side plate 3 and extend to the inside of the side plate of the second bending machine 4, and the second bending machine The worktable 5'and the lower die 6'on the machine 4 are spliced together; since the end faces of the worktable and the lower die are finished surfaces, the worktables of the first bending machine 2 and the second bending machine 4 can be The gap of the splicing seam 1 at the splicing part of the die is very small, below 1mm. When the two machines work in the linkage, the sheet material is bent at the joint of the lower die of the two bending machines with high bending accuracy and no special-shaped transition zone.

Get A Quote
Home
Copyright  2023 Nanjing Harsle Machine Tool Co. Ltd. All rights reserved.