Preparing steps before starting press brake
You are here: Home » Support » Tutorials » Press Brake » Preparing steps before starting press brake

Preparing steps before starting press brake

Views: 1330     Author: Site Editor     Publish Time: 2018-11-12      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Overview

For some new customers who operated HARSLE hydraulic press brake machine for the first time, they will be a little confused about how to start sheet bending machine when they receive the CNC press brake in their factory. Today we will share some tips about how to run the machine correctly with you. 

Operation Steps

Fill the oil tank with #46 hydraulic oil → Connect the cables between hydraulic press brake and the power correctly → Connect the foot switch on the hydraulic press brake → Loose the emergency stop button and start the pump → Press the stop button immediately → Check the rotating direction of the main motor → If the direction is clockwise, then the connection is correct, if the direction is anti-clockwise, please change the connection until the direction is clockwise → Start and run the machine

Video Show

Get A Quote
Home
Copyright  2023 Nanjing Harsle Machine Tool Co. Ltd. All rights reserved.