TROUBLESHOOTING & TUTORIAL

Operation of the control is mainly done over the touchscreen. A description of the functions and available touch controls is given in the next sections of this manual, aside of the description of the specific functions. DELEM DA-53T Operation manual for CNC press brake machine (Passwords), Offline software download.

Operation of the control is mainly done over the touchscreen. A description of the functions and available touch controls is given in the next sections of this manual, aside of the description of the specific functions.

This manual contains information necessary for installation of a DA-Touch control on a pressbrake machine. It is meant for service people who are authorised for service and installation of the machine.

The DA-41 is a programmable control for conventional press brake machines. This manual assumes that the DA-41 is configured using the bending depth formula. If the unit is configured for bending depth calculation based on tables please refer to the version 2 user manual (8064-901C). If you are not sure which method is configured please contact your machine supplier.

In the actual use of the bending machine, bending accuracy will be more or less error, sometimes it may be the mechanical factors of the machine bending accuracy is not high enough, may also be some external factors, such as bending tooling, bending plate material thickness, etc.

The precise outfit of your control may vary. Operation of the control is mainly done over the touchscreen. A description of the functions and available touch controls is given in the next sections of this manual, aside of the description of the specific functions.