Punch work instruction book

Punch work instruction book

1. Purpose: To enable operators to operate the equipment correctly and produce qualified products.

2. Scope of application: Suitable for all punching operations and maintenance of the company.

3. Content:

   ●Wear overalls, gloves and essential labor protection supplies.

   ●Check the lubrication of each part, and increase the lubricating oil in time to make the parts fully lubricated.

   ●Check that the mold installation is correct and reliable.

   ●Ensure that the flywheel and the clutch are completely disengaged before starting the machine.

   ●When starting the machine, it must be noted that the direction of rotation of the flywheel is consistent with the direction of the marked arrow. If the direction is reversed, the power supply must be cut off immediately for maintenance.

   ●After the machine is started, the press must be run for several strokes to check the operation of the brakes, operators and clutches.

   ●Regular lubrication of each lubrication point is regularly lubricated.

   ●When the press is abnormal, it should stop working immediately and only the team leader and mechanics should be in time.

   ●The flywheel of the machine is completely disengaged from the clutch, and then the power is turned off.

   ●Clean the production waste around the machine into the frame, wipe the machine clean, clean the surrounding sanitation, disassemble the used mold and place it in the designated mold placement area.

4. Note:

   ●When operating, the two-hand operation mode is preferred. When using the foot pedal, the foot should be removed from the foot switch after each stroke to avoid accidental stepping.

   ●Do not remove the protective cover.

   ●No drinking operation.

   ●It is strictly forbidden to extend the hand and head into the slider area.

   ●Do not touch the power terminal and the rotating flywheel with your hands.

   ●It is strictly forbidden to operate the equipment with illness.

5. Maintenance requirements:

   ●Strictly observe the "General Equipment Maintenance and Maintenance Regulations".

   ●The equipment is effectively maintained and maintained on a regular basis every month.