WC67K-100T/3200 Econom Press Brake with TP10S
You are here: Home » Showroom » Video Gallery » Press Brake » WC67K-100T/3200 Econom Press Brake with TP10S

WC67K-100T/3200 Econom Press Brake with TP10S

Views: 47     Author: Site Editor     Publish Time: 2022-07-12      Origin: Site

Inquire

Main Features

Quick Clamp.

Standard Punch and Multi-V Die.

Backgauge with Manual R-Axis.

Torsion-Bar with Rack Structure.

Bending Products.

Step one: the bending angle is ninety degrees, bending length is thirty millimeters.

Step two: the bending angle is one hundred and thirty-five degrees, bending length is eighty millimeters.

Step three: the bending angle is ninety degrees, bending length is thirty millimeters.

Bending is completed, and the workpiece meets the requirements.


The hydraulic bending machine includes a bracket, a worktable, and a clamping plate. The worktable is placed on the bracket. The worktable is composed of a base and a pressure plate. The base is connected to the clamping plate by a hinge. The base is composed of a seat shell, a coil, and a cover plate. The coil is placed in the recess of the seat shell, and the top of the recess is covered with a cover plate. When in use, the coil is energized by the wire, and after the electricity is energized, a gravitational force is generated on the pressure plate, to realize the clamping of the thin plate between the pressure plate and the base. Due to the use of electromagnetic force clamping, the pressing plate can be made into various workpiece requirements, and the workpiece with sidewalls can be processed.

Video

 

Get A Quote
Home
Copyright  2023 Nanjing Harsle Machine Tool Co. Ltd. All rights reserved.