HARSLE 63T2500 NC hydraulic press brake machine with E200P
● E200P NC controller for easy bending program
● Stop fingers on double linear guide for easy movement
● Fast clamps for easy punch clamp and release
● Corrugated plate bending and 90 degrees bending
The hydraulic bending machine includes a bracket, a worktable, and a clamping plate. The worktable is placed on the bracket. The worktable is composed of a base and a pressure plate. The base is connected to the clamping plate by a hinge. The base is composed of a seat shell, a coil, and a cover plate. The coil is placed in the recess of the seat shell, and the top of the recess is covered with a cover plate. When in use, the coil is energized by the wire, and after the electricity is energized, a gravitational force is generated on the pressure plate, to realize the clamping of the thin plate between the pressure plate and the base. Due to the use of electromagnetic force clamping, the pressing plate can be made into various workpiece requirements, and the workpiece with sidewalls can be processed.
English
Pусский
