Views: 39 Author: Site Editor Publish Time: 2021-12-28 Origin: Site
Y27-200T four-column single-movement hydraulic press machine factory. A hydraulic press is a machine that uses liquid as the working medium and is made according to Pascal's principle to transfer energy to realize various processes. The hydraulic press generally consists of three parts: the machine (host), the power system and the hydraulic control system. Hydraulic presses are classified into valve hydraulic presses, liquid hydraulic presses, and engineering hydraulic presses.
Working principle
The working principle of hydraulic press. The areas of the large and small plungers are S2 and S1, respectively, and the forces acting on the plungers are F2 and F1, respectively. According to Pascal's principle, the pressure of the closed liquid is equal everywhere, that is, F2/S2=F1/S1=p; F2=F1(S2/S1). Indicates the hydraulic gain. Like the mechanical gain, the force increases, but the work does not gain. Therefore, the moving distance of the large plunger is S1/S2 times the moving distance of the small plunger.
● Computer optimized structure design; four-column structure: simple, economic and practical.
● Cartridge valve equipped for hydraulic control system, reliable, durable and less hydraulic shock, shorter connection pipeline and fewer release points,Hydraulic integrated system is adopted seperate control unit.
● Independent electrical control, reliable,audio-visual and convenient for maintenance.
● Centralized button control system,with adjustment,hand and semi-auto operation modes at operator’s choice(semi-automatic has two type tech:set-stroke single and set-pressure single).
● The operating force, no-load traveling and, low-speed movement and travel range can be adjusted subject to technological requirements.
| No. | Item | Unit | Y27-200T | |
| 1 | Nominal Force | KN | 2000 | |
| 2 | Return force | KN | 240 | |
| 3 | Working pressure | Mpa | 25 | |
| 4 | Cushion pressure | KN | 400 | |
| 5 | Daylight of slide | mm | 1120 | |
| 6 | Stroke | Upper slide | mm | 710 |
| Cushion | mm | 250 | ||
| 7 | Worktable size | L-R | mm | 1000 |
| F-B | mm | 940 | ||
| 8 | Cushion size | L-R | mm | 660 |
| F-B | mm | 600 | ||
| 9 | Speed of slide | Descent | mm/s | 150 |
| Pressing | mm/s | 5~12 | ||
| Return | mm/s | 95 | ||
| 10 | Table height above floor | mm | 700 | |
| 11 | Dimension | Front and Back | mm | 3100 |
| Left and Right | mm | 1350 | ||
| 12 | Motor power | kw | 15 | |
English
Pусский
