{"id":81448,"date":"2026-03-20T08:11:01","date_gmt":"2026-03-20T08:11:01","guid":{"rendered":"https:\/\/www.harsle.com\/?post_type=docs&#038;p=81448"},"modified":"2026-03-20T08:11:06","modified_gmt":"2026-03-20T08:11:06","password":"","slug":"press-brake-angle-compensation","status":"publish","type":"docs","link":"https:\/\/www.harsle.com\/de\/docs\/press-brake-angle-compensation\/","title":{"rendered":"Wie l\u00e4sst sich ein Fehler bei der Winkelkompensation einer Abkantpresse beheben?"},"content":{"rendered":"<p class=\"wp-block-paragraph\">Wenn Bediener auf uneinheitliche Biegewinkel sto\u00dfen, \u00fcberpr\u00fcfe ich normalerweise als erstes, ob ein <strong>Ausfall der Winkelkompensation der Abkantpresse<\/strong> Winkelkompensation ist entscheidend f\u00fcr die Biegegenauigkeit, insbesondere bei der Bearbeitung langer Werkst\u00fccke oder dickerer Bleche. F\u00e4llt das System aus, kann die Maschine unterschiedliche Winkel am selben Werkst\u00fcck erzeugen, was zu Qualit\u00e4tsproblemen und Ausschuss f\u00fchrt. In diesem Leitfaden erkl\u00e4re ich die h\u00e4ufigsten Ursachen f\u00fcr das Versagen der Winkelkompensation an Abkantpressen und zeige Ihnen praktische Schritte zur Fehlerbehebung, mit denen ich das Problem effizient diagnostiziere und behebe.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Verstehen, wie <a href=\"https:\/\/stock.harsle.com\/\" target=\"_blank\" rel=\"noopener\">Abkantpresse<\/a> Winkelkompensation funktioniert<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Bevor ich ein Problem behebe, stelle ich immer sicher, dass der Bediener die Funktionsweise des Systems versteht. Die Winkelkompensation der Abkantpresse, oft auch als Bombierungskompensation bezeichnet, hilft, die nat\u00fcrliche Durchbiegung des Maschinenrahmens beim Biegen auszugleichen.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Warum eine Winkelkompensation bei CNC-Abkantpressen notwendig ist<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"800\" height=\"625\" src=\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Press-Brake-Angle-Compensation.jpg\" alt=\"Ausfall der Winkelkompensation der Abkantpresse\" class=\"wp-image-81453\" srcset=\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Press-Brake-Angle-Compensation.jpg 800w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Press-Brake-Angle-Compensation-384x300.jpg 384w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Press-Brake-Angle-Compensation-768x600.jpg 768w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Press-Brake-Angle-Compensation-15x12.jpg 15w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Press-Brake-Angle-Compensation-360x281.jpg 360w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Press-Brake-Angle-Compensation-430x336.jpg 430w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Press-Brake-Angle-Compensation-700x547.jpg 700w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Press-Brake-Angle-Compensation-150x117.jpg 150w\" sizes=\"auto, (max-width: 800px) 100vw, 800px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Beim Biegen von Metall mit einer Abkantpresse neigt die Mitte des St\u00f6\u00dfels und des Maschinentisches aufgrund des Drucks dazu, sich leicht durchzubiegen. Ohne Kompensation weicht der Biegewinkel in der Werkst\u00fcckmitte von den R\u00e4ndern ab. Das Winkelkompensationssystem korrigiert diese Durchbiegung und sorgt so f\u00fcr ein gleichm\u00e4\u00dfiges Biegen.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Moderne CNC-Abkantpressen verwenden unter anderem:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Mechanische Kronensysteme<\/li>\n\n\n\n<li>Hydraulische Bombiersysteme<\/li>\n\n\n\n<li>Automatische CNC-gesteuerte Kompensationssysteme<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Wenn eine Komponente dieser Systeme ausf\u00e4llt, <strong>Ausfall der Winkelkompensation der Abkantpresse<\/strong> kann auftreten und zu uneinheitlichen Biegewinkeln f\u00fchren.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">H\u00e4ufige Ursachen f\u00fcr <a href=\"https:\/\/www.harsle.com\/de\/press-brake\/\">Abkantpresse<\/a> Winkelkompensationsfehler<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Bei der Fehlersuche in Winkelproblemen untersuche ich \u00fcblicherweise mehrere h\u00e4ufige Ursachen.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Falsche Einstellungen der Kronenformparameter<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Eine der h\u00e4ufigsten Ursachen sind fehlerhafte Parametereinstellungen an der CNC-Steuerung. Wenn der Bombierungswert nicht mit der Materialst\u00e4rke, der Werkzeug\u00f6ffnung oder der Biegekraft \u00fcbereinstimmt, kann das System dies nicht korrekt kompensieren.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Um dieses Problem zu beheben, gehe ich normalerweise wie folgt vor:<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"800\" height=\"533\" src=\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Incorrect-Crowning-Parameter-Settings-1.jpg\" alt=\"\" class=\"wp-image-81457\" srcset=\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Incorrect-Crowning-Parameter-Settings-1.jpg 800w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Incorrect-Crowning-Parameter-Settings-1-400x267.jpg 400w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Incorrect-Crowning-Parameter-Settings-1-768x512.jpg 768w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Incorrect-Crowning-Parameter-Settings-1-18x12.jpg 18w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Incorrect-Crowning-Parameter-Settings-1-360x240.jpg 360w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Incorrect-Crowning-Parameter-Settings-1-430x286.jpg 430w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Incorrect-Crowning-Parameter-Settings-1-700x466.jpg 700w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Incorrect-Crowning-Parameter-Settings-1-150x100.jpg 150w\" sizes=\"auto, (max-width: 800px) 100vw, 800px\" \/><\/figure>\n\n\n\n<ul class=\"wp-block-list\">\n<li>\u00dcberpr\u00fcfen Sie den Bombierungsparameter an der CNC-Steuerung.<\/li>\n\n\n\n<li>Materialst\u00e4rke und Eingabe der Werkzeugbreite pr\u00fcfen<\/li>\n\n\n\n<li>Passen Sie den Kompensationswert entsprechend der Biegekraft an.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Die korrekte Einstellung der Parameter behebt h\u00e4ufig sofort das Problem des Ausfalls der Abkantpressenwinkelkompensation.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Fehlfunktion des hydraulischen Bombiersystems<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"800\" height=\"481\" src=\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Incorrect-Crowning-Parameter-Settings.jpg\" alt=\"Ausfall der Winkelkompensation der Abkantpresse\" class=\"wp-image-81454\" srcset=\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Incorrect-Crowning-Parameter-Settings.jpg 800w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Incorrect-Crowning-Parameter-Settings-400x241.jpg 400w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Incorrect-Crowning-Parameter-Settings-768x462.jpg 768w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Incorrect-Crowning-Parameter-Settings-18x12.jpg 18w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Incorrect-Crowning-Parameter-Settings-360x216.jpg 360w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Incorrect-Crowning-Parameter-Settings-430x259.jpg 430w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Incorrect-Crowning-Parameter-Settings-700x421.jpg 700w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Incorrect-Crowning-Parameter-Settings-150x90.jpg 150w\" sizes=\"auto, (max-width: 800px) 100vw, 800px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Bei Abkantpressen mit hydraulischer Bombiervorrichtung spielt der Hydraulikdruck eine entscheidende Rolle. Funktioniert das Hydrauliksystem nicht ordnungsgem\u00e4\u00df, schl\u00e4gt die Kompensation fehl.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Typische Symptome sind:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Ungleichm\u00e4\u00dfige Biegewinkel \u00fcber das Werkst\u00fcck<\/li>\n\n\n\n<li>Langsame oder verz\u00f6gerte Entsch\u00e4digungsreaktion<\/li>\n\n\n\n<li>Schwankung des Hydraulikdrucks<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Ich \u00fcberpr\u00fcfe \u00fcblicherweise Hydraulikventile, Drucksensoren und den \u00d6lfluss, um sicherzustellen, dass die Kolbenbolzen ordnungsgem\u00e4\u00df funktionieren.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Mechanischer Verschlei\u00df des Kronenblocks<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"800\" height=\"533\" src=\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Mechanical-Crowning-Block-Wear.jpg\" alt=\"Mechanische Bombierung\" class=\"wp-image-81459\" srcset=\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Mechanical-Crowning-Block-Wear.jpg 800w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Mechanical-Crowning-Block-Wear-400x267.jpg 400w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Mechanical-Crowning-Block-Wear-768x512.jpg 768w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Mechanical-Crowning-Block-Wear-18x12.jpg 18w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Mechanical-Crowning-Block-Wear-360x240.jpg 360w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Mechanical-Crowning-Block-Wear-430x286.jpg 430w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Mechanical-Crowning-Block-Wear-700x466.jpg 700w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Mechanical-Crowning-Block-Wear-150x100.jpg 150w\" sizes=\"auto, (max-width: 800px) 100vw, 800px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Mechanische Kronensysteme verwenden verstellbare Keile oder Bl\u00f6cke unter dem Untertisch. Im Laufe der Zeit k\u00f6nnen diese Komponenten verschlei\u00dfen oder ihre Ausrichtung verlieren.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Wenn das passiert, \u00fcberpr\u00fcfe ich Folgendes:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Ausrichtung der Keilbl\u00f6cke<\/li>\n\n\n\n<li>Schmierzustand<\/li>\n\n\n\n<li>Genauigkeit der mechanischen Justierung<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Durch die Reinigung und Neukalibrierung der mechanischen Kronenvorrichtung l\u00e4sst sich die korrekte Kompensation oft wiederherstellen.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Schrittweise Fehlerbehebung bei Ausfall der Winkelkompensation der Abkantpresse<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Bei der Fehlerdiagnose in einem Workshop gehe ich in der Regel strukturiert vor.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Schritt 1: Werkzeug- und Werkst\u00fcckeinrichtung \u00fcberpr\u00fcfen<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Bevor ich die Maschine beschuldige, \u00fcberpr\u00fcfe ich zun\u00e4chst, ob die Werkzeugeinstellung korrekt ist.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Ich \u00fcberpr\u00fcfe Folgendes:<\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"800\" height=\"800\" src=\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Punch-and-die-alignment.jpg\" alt=\"\" class=\"wp-image-81463\" srcset=\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Punch-and-die-alignment.jpg 800w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Punch-and-die-alignment-300x300.jpg 300w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Punch-and-die-alignment-150x150.jpg 150w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Punch-and-die-alignment-768x768.jpg 768w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Punch-and-die-alignment-12x12.jpg 12w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Punch-and-die-alignment-360x360.jpg 360w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Punch-and-die-alignment-430x430.jpg 430w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Punch-and-die-alignment-700x700.jpg 700w\" sizes=\"auto, (max-width: 800px) 100vw, 800px\" \/><\/figure>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Ausrichtung von Stempel und Matrize<\/li>\n\n\n\n<li>Werkzeugverschlei\u00df oder Besch\u00e4digung<\/li>\n\n\n\n<li>Korrekte Matrizen\u00f6ffnung f\u00fcr das Material<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Unsachgem\u00e4\u00dfe Werkzeugausstattung kann einen Ausfall der Winkelkompensation an der Abkantpresse vort\u00e4uschen, selbst wenn das Kompensationssystem normal funktioniert.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Schritt 2: CNC-Controller-Kompensationseinstellungen pr\u00fcfen<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"800\" height=\"600\" src=\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Check-CNC-Controller-Compensation-Settings.jpg\" alt=\"\" class=\"wp-image-81464\" srcset=\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Check-CNC-Controller-Compensation-Settings.jpg 800w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Check-CNC-Controller-Compensation-Settings-400x300.jpg 400w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Check-CNC-Controller-Compensation-Settings-768x576.jpg 768w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Check-CNC-Controller-Compensation-Settings-16x12.jpg 16w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Check-CNC-Controller-Compensation-Settings-360x270.jpg 360w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Check-CNC-Controller-Compensation-Settings-430x323.jpg 430w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Check-CNC-Controller-Compensation-Settings-700x525.jpg 700w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Check-CNC-Controller-Compensation-Settings-150x113.jpg 150w\" sizes=\"auto, (max-width: 800px) 100vw, 800px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Als N\u00e4chstes \u00fcberpr\u00fcfe ich die Einstellungen der CNC-Steuerung.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Wichtige Parameter sind:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Kr\u00f6nender Wert<\/li>\n\n\n\n<li>Berechnung der Biegekraft<\/li>\n\n\n\n<li>Materialeigenschaften<\/li>\n\n\n\n<li>Blechdickeneingabe<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Falsche Eingaben k\u00f6nnen zu ungenauen Entsch\u00e4digungsberechnungen f\u00fchren.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Schritt 3: Hydraulisches oder mechanisches Kompensationssystem pr\u00fcfen<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Je nach Konstruktion der Abkantpresse \u00fcberpr\u00fcfe ich anschlie\u00dfend die Kompensationsvorrichtung.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Bei Hydrauliksystemen pr\u00fcfe ich:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>\u00d6ldruckstabilit\u00e4t<\/li>\n\n\n\n<li>Hydraulikventile<\/li>\n\n\n\n<li>Bewegung des Kompensationszylinders<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Bei mechanischen Systemen \u00fcberpr\u00fcfe ich:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Keilblockbewegung<\/li>\n\n\n\n<li>Schmierung<\/li>\n\n\n\n<li>Mechanische Kalibrierung<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Diese Inspektionen decken in der Regel die Ursache f\u00fcr das Versagen der Winkelkompensation der Abkantpresse auf.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Schritt 4: F\u00fchren Sie eine Testbiegung und Winkelmessung durch.<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"800\" height=\"421\" src=\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Perform-a-Test-Bend-and-Angle-Measurement.jpg\" alt=\"\" class=\"wp-image-81465\" srcset=\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Perform-a-Test-Bend-and-Angle-Measurement.jpg 800w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Perform-a-Test-Bend-and-Angle-Measurement-400x211.jpg 400w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Perform-a-Test-Bend-and-Angle-Measurement-768x404.jpg 768w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Perform-a-Test-Bend-and-Angle-Measurement-18x9.jpg 18w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Perform-a-Test-Bend-and-Angle-Measurement-360x189.jpg 360w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Perform-a-Test-Bend-and-Angle-Measurement-430x226.jpg 430w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Perform-a-Test-Bend-and-Angle-Measurement-700x368.jpg 700w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Perform-a-Test-Bend-and-Angle-Measurement-150x79.jpg 150w\" sizes=\"auto, (max-width: 800px) 100vw, 800px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Nach den Justierungen f\u00fchre ich immer eine Probebiegung durch.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Mit einem digitalen Winkelmesser messe ich den Biegewinkel bei:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Die linke Seite des Werkst\u00fccks<\/li>\n\n\n\n<li>Das Zentrum<\/li>\n\n\n\n<li>Die rechte Seite<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Wenn die Winkel \u00fcbereinstimmen, funktioniert das Kompensationssystem korrekt.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Vermeidung von Fehlern bei der Winkelkompensation der Abkantpresse<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Meiner Erfahrung nach verringert vorbeugende Instandhaltung das Risiko von Entsch\u00e4digungsproblemen erheblich.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Regelm\u00e4\u00dfige Kalibrierung des Kronensystems<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"800\" height=\"533\" src=\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Regular-Calibration-of-the-Crowning-System.jpg\" alt=\"Regelm\u00e4\u00dfige Kalibrierung des Kronensystems\" class=\"wp-image-81466\" srcset=\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Regular-Calibration-of-the-Crowning-System.jpg 800w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Regular-Calibration-of-the-Crowning-System-400x267.jpg 400w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Regular-Calibration-of-the-Crowning-System-768x512.jpg 768w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Regular-Calibration-of-the-Crowning-System-18x12.jpg 18w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Regular-Calibration-of-the-Crowning-System-360x240.jpg 360w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Regular-Calibration-of-the-Crowning-System-430x286.jpg 430w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Regular-Calibration-of-the-Crowning-System-700x466.jpg 700w, https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/03\/Regular-Calibration-of-the-Crowning-System-150x100.jpg 150w\" sizes=\"auto, (max-width: 800px) 100vw, 800px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Durch regelm\u00e4\u00dfige Kalibrierung wird die pr\u00e4zise Funktion des Kompensationssystems sichergestellt. Ich empfehle, die Bombierungsparameter nach gr\u00f6\u00dferen Werkzeugwechseln oder beim Materialwechsel zu \u00fcberpr\u00fcfen.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Routineinspektion von Hydraulikkomponenten<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Bei hydraulischen Bombiersystemen umfasst die routinem\u00e4\u00dfige Wartung Folgendes:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>\u00dcberpr\u00fcfung der Hydraulik\u00f6lqualit\u00e4t<\/li>\n\n\n\n<li>\u00dcberpr\u00fcfung der Druckstabilit\u00e4t<\/li>\n\n\n\n<li>Reinigungsfilter<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Diese Ma\u00dfnahmen verhindern Leistungseinbu\u00dfen.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Ordnungsgem\u00e4\u00dfe Werkzeugwartung<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Der Zustand der Werkzeuge hat direkten Einfluss auf die Biegegenauigkeit. Saubere und korrekt ausgerichtete Stempel und Matrizen reduzieren Kompensationsfehler und verbessern die Produktionskonstanz.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">FAQs<\/h2>\n\n\n<div id=\"rank-math-faq\" class=\"rank-math-block\">\n<div class=\"rank-math-list\">\n<div id=\"faq-question-1773712008676\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\"><strong>Was ist die h\u00e4ufigste Ursache f\u00fcr einen Ausfall der Winkelkompensation bei Abkantpressen?<\/strong><\/h3>\n<div class=\"rank-math-answer\">\n\n<p>Die h\u00e4ufigsten Ursachen sind falsche CNC-Parametereinstellungen, Fehlfunktionen des hydraulischen Bombiersystems oder eine Fehlausrichtung des mechanischen Bombierblocks.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-1773712023360\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\"><strong>Wie kann ich schnell \u00fcberpr\u00fcfen, ob mein Abkantpressen-Kompensationssystem funktioniert?<\/strong><\/h3>\n<div class=\"rank-math-answer\">\n\n<p>F\u00fchren Sie eine Probebiegung durch und messen Sie den Winkel an mehreren Punkten des Werkst\u00fccks. Weicht der Winkel in der Mitte von den Winkeln an den R\u00e4ndern ab, funktioniert die Kompensation m\u00f6glicherweise nicht ordnungsgem\u00e4\u00df.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-1773712029808\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\"><strong>Kann verschlissenes Werkzeug zum Ausfall der Winkelkompensation einer Abkantpresse f\u00fchren?<\/strong><\/h3>\n<div class=\"rank-math-answer\">\n\n<p>Ja. Abgenutzte oder besch\u00e4digte Stempel und Matrizen k\u00f6nnen ungleichm\u00e4\u00dfige Biegewinkel erzeugen, die einem Versagen des Kompensationssystems \u00e4hnlich sehen k\u00f6nnen.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-1773712040426\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question\"><strong><strong>Wie oft sollte ich das Bombiersystem der Abkantpresse kalibrieren?<\/strong><\/strong><\/h3>\n<div class=\"rank-math-answer\">\n\n<p>Eine Kalibrierung wird empfohlen, wenn sich die Werkzeuge \u00e4ndern, neue Materialien eingef\u00fchrt werden oder Probleme mit der Biegegenauigkeit auftreten.<\/p>\n\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">Abschluss<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Fehler in der Winkelkompensation von Abkantpressen k\u00f6nnen die Biegegenauigkeit, die Produktionseffizienz und die Produktqualit\u00e4t erheblich beeintr\u00e4chtigen. Durch das Verst\u00e4ndnis der Funktionsweise des Kompensationssystems und die systematische Fehlersuche \u2013 \u00dcberpr\u00fcfung der Werkzeugeinstellungen, der CNC-Parameter und der Kompensationshardware \u2013 kann ich das Problem in der Regel schnell identifizieren und beheben.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Regelm\u00e4\u00dfige Wartung und korrekte Maschinenkalibrierung sind die besten M\u00f6glichkeiten, dieses Problem von vornherein zu vermeiden. Sollten weiterhin Probleme mit der Biegegenauigkeit auftreten oder Sie fachkundige Unterst\u00fctzung f\u00fcr Ihre Abkantpresse ben\u00f6tigen, empfehlen wir Ihnen, sich an unser technisches Team zu wenden oder die zus\u00e4tzlichen Wartungsanleitungen auf unserer Website einzusehen.<\/p>","protected":false},"excerpt":{"rendered":"<p>When operators encounter inconsistent bending angles, the first thing I usually check is whether a Press Brake Angle Compensation Failure<\/p>","protected":false},"author":6,"featured_media":81830,"comment_status":"open","ping_status":"closed","template":"","meta":{"footnotes":""},"doc_category":[3252],"doc_tag":[3292,3262,3273],"knowledge_base":[3228],"class_list":["post-81448","docs","type-docs","status-publish","has-post-thumbnail","hentry","doc_category-troubleshooting-tips","doc_tag-bending-accuracy","doc_tag-cnc-press-brake","doc_tag-press-brake-maintenance","knowledge_base-press-brake"],"year_month":"2026-05","word_count":964,"total_views":"471","reactions":{"happy":"0","normal":"0","sad":"0"},"author_info":{"name":"Venus Guo","author_nicename":"venus","author_url":"https:\/\/www.harsle.com\/de\/author\/venus\/"},"doc_category_info":[{"term_name":"Troubleshooting Tips","term_url":"https:\/\/www.harsle.com\/de\/docs\/hydraulic-press\/troubleshooting-tips\/"}],"doc_tag_info":[{"term_name":"Bending Accuracy","term_url":"https:\/\/www.harsle.com\/de\/docs-tag\/bending-accuracy\/"},{"term_name":"CNC Press Brake","term_url":"https:\/\/www.harsle.com\/de\/docs-tag\/cnc-press-brake\/"},{"term_name":"Press Brake Maintenance","term_url":"https:\/\/www.harsle.com\/de\/docs-tag\/press-brake-maintenance\/"}],"jetpack_sharing_enabled":true,"knowledge_base_info":[{"term_name":"Press Brake","term_url":"https:\/\/www.harsle.com\/de\/docs\/press-brake\/","term_slug":"press-brake"}],"knowledge_base_slug":["press-brake"],"_links":{"self":[{"href":"https:\/\/www.harsle.com\/de\/wp-json\/wp\/v2\/docs\/81448","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.harsle.com\/de\/wp-json\/wp\/v2\/docs"}],"about":[{"href":"https:\/\/www.harsle.com\/de\/wp-json\/wp\/v2\/types\/docs"}],"author":[{"embeddable":true,"href":"https:\/\/www.harsle.com\/de\/wp-json\/wp\/v2\/users\/6"}],"replies":[{"embeddable":true,"href":"https:\/\/www.harsle.com\/de\/wp-json\/wp\/v2\/comments?post=81448"}],"version-history":[{"count":0,"href":"https:\/\/www.harsle.com\/de\/wp-json\/wp\/v2\/docs\/81448\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.harsle.com\/de\/wp-json\/wp\/v2\/media\/81830"}],"wp:attachment":[{"href":"https:\/\/www.harsle.com\/de\/wp-json\/wp\/v2\/media?parent=81448"}],"wp:term":[{"taxonomy":"doc_category","embeddable":true,"href":"https:\/\/www.harsle.com\/de\/wp-json\/wp\/v2\/doc_category?post=81448"},{"taxonomy":"doc_tag","embeddable":true,"href":"https:\/\/www.harsle.com\/de\/wp-json\/wp\/v2\/doc_tag?post=81448"},{"taxonomy":"knowledge_base","embeddable":true,"href":"https:\/\/www.harsle.com\/de\/wp-json\/wp\/v2\/knowledge_base?post=81448"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}