PortaPremere
Up to 3000 tons of hydraulic force for deep, crisp steel door embossing.
Door Panel Embossing
Fast, Reliable Embossing
A high-performance hydraulic forming system built specifically to create surface textures on metal door panels. Precisely aligned upper and lower molds apply uniform pressure to the sheet, producing crisp, three-dimensional patterns with stable, repeatable results — for every pattern, texture and structural design you need.
- High-pressure hydraulic system
- Precise embossing control
- Wide application
- High security
Alta precisione
Precisely aligned upper and lower molds for sharp, accurate patterns.
Stable Forming
Uniform pressure across the whole sheet, panel after panel.
Long Service
Chrome-plated cylinders and imported seals for a longer lifetime.
Facile da usare
PLC control with an optional touchscreen for intuitive operation.
Core Components
Oil Cilindro
The link between hydraulic control and the machine. Every cylinder is designed with computer-aided calculations and drawings and built in our own dedicated factory.
Plunger Cylinder
Each DoorPress runs six plunger cylinders, built from a cylinder barrel, plunger and guide bushing. The multi-cylinder layout spreads force evenly over the full mold for consistent embossing depth across the panel.
Anelli di tenuta
Seal rings seal the cylinder on the piston or rod to prevent medium leakage and keep the press working properly under all conditions. Oversized lips create linear force for a better seal. HARSLE uses high-quality imported seal rings in its hydraulic cylinders.
Rivestimento cromato
The cylinder rods are chrome-coated to protect the rod surface, giving a longer lifetime and a clean, shiny finish.
Automazione
Hydraulics & Controllare
Automation in the pressing process improves efficiency, accuracy and operating convenience, and makes production more flexible and responsive.
Fast oil filling during the slide's idle stroke, stable high-pressure holding while forming, and high-volume discharge on return — for smooth, efficient embossing.
* Optional
From Coil to Embossing
Automazione Soluzioni
Optional equipment that turns a single press into a continuous line — from coil unwinding and leveling to sheet cutting and precise feeding.
01 / 04
Uncoiler Machine *
Supports steel or aluminum coils on an expanding mandrel for smooth unwinding, working in tandem with leveling and feeding equipment.
Roller Straightener *
Precision rollers level the sheet for better flatness, driven by a three-phase motor and reducer with geared correction rollers.
Sheet Cutting Station *
Automatic conveying, positioning and high-precision cutting with smooth, burr-free edges — less manual work and less material waste.
Electronic CNC Feeder *
CNC-controlled sheet feeding with high positioning accuracy and stable performance for continuous production.
* Optional
Idraulico Cushion *
Provides stable upward support during embossing, spreading pressure evenly across the panel. Ejector rods in the worktable move with the lower cylinders and work with the mold for border and pattern forming — reducing deformation, defects and material waste.
Riduzione delle vibrazioni
Precisione migliorata
Maggiore sicurezza
Durata di vita estesa
Aumento dell'efficienza
* Optional. DoorPress Y27-3000T/1500T provides 15000 kN knock-out pressure.
Built to Last
Affidabile Systems
Parti elettriche
The central control hub for precise machine operation and easy maintenance monitoring, built with well-known brands such as Siemens or Schneider.
Sistema di lubrificazione
Pull the handle to force grease to the lubrication points; release it and the spring-loaded piston refills the chamber. Simple, effortless and effective.
Fast, Reliable Embossing
Heavy-Duty Hydraulic Pressing for Crisp, Consistent Steel Door Panels
Applicazioni
Embossed Door Panels
Embossed Door Panels
for Every Market
DoorPress embosses security, steel and stainless steel door panels — from clean geometric layouts to richly carved relief and framed patterns.
Security Doors
Security Doors
Visualizza le applicazioni
Steel Entry Doors
Steel Entry Doors
Visualizza le applicazioni
Stainless Steel Doors
Stainless Steel Doors
Visualizza le applicazioni
Framed Pattern Panels
Framed Pattern Panels
Visualizza le applicazioni
Custom Relief Patterns
Custom Relief Patterns
Visualizza le applicazioni
Main & Secondary Doors
Main & Secondary Doors
Visualizza le applicazioni
Dati tecnici
Schemi
Tutti i modelli a colpo d'occhio: confrontali fianco a fianco
DoorPress
Y32-2000T
Y32-2000T
DoorPress
Y32-2500T
Y32-2500T
DoorPress
Y32-3000T
Y32-3000T
DoorPress
Y27-3000T/1500T
Y27-3000T/1500T
20000 kN
Forza nominale
25000 kN
Forza nominale
30000 kN
Forza nominale
30000 kN
Forza nominale
502 kN
Forza di ritorno
785 kN
Forza di ritorno
785 kN
Forza di ritorno
785 kN
Forza di ritorno
600 mm
Max. Daylight Opening
600 mm
Max. Daylight Opening
600 mm
Max. Daylight Opening
600 mm
Max. Daylight Opening
500 mm
Corsa diapositiva
500 mm
Corsa diapositiva
500 mm
Corsa diapositiva
500 mm
Corsa diapositiva
25 MPa
Max. Working Pressure
25 MPa
Max. Working Pressure
25 MPa
Max. Working Pressure
25 MPa
Max. Working Pressure
22×2 kW
Potenza del motore
22×1 + 30×1 kW
Potenza del motore
30×2 kW
Potenza del motore
30×2 kW
Potenza del motore
ZSG420×500×6pcs
Model of Plunger Cylinder
ZSG460×500×6pcs
Model of Plunger Cylinder
ZSG500×500×6pcs
Model of Plunger Cylinder
ZSG500×500×6pcs
Model of Plunger Cylinder
N46# Hydraulic Oil
Working Medium
N46# Hydraulic Oil
Working Medium
N46# Hydraulic Oil
Working Medium
N46# Hydraulic Oil
Working Medium
HY100Y×2
Oil Pump
HY100Y + HY160Y
Oil Pump
HY160Y×2
Oil Pump
HY160Y×2
Oil Pump
Inizia subito
Pronto a
Pronto a
Padroneggia il tuo
Produzione?
Richiedi un preventivo personalizzato, studiato appositamente per le tue esigenze. Il nostro team di ingegneri ti aiuterà a configurare la soluzione ideale per la tua produzione.
Cosa riceverai
Selezione della macchina
Supporto tecnico
Preventivo dettagliato
Risposta entro 24 ore
Richiedi un preventivo
Inserisci i dettagli qui sotto e ti ricontatteremo entro 24 ore.
