To enter ESA S929 Automatic Mode, open the Editor page and press the Automatic Mode icon. <\/p>\n\n\n\n The controller will switch to the automatic operation interface, where operators can monitor machine status and execute the selected bending program.<\/p>\n\n\n\n The automatic screen displays the current bend information, programmed values, tooling data, and axis positions in real time, allowing operators to verify the setup before starting production.<\/p>\n\n\n\n The ESA S929 Automatic Mode screen provides essential information for monitoring the bending process.<\/p>\n\n\n\n Current Program Information<\/strong><\/p>\n\n\n\n At the top of the interface, the controller displays the active bending step within the selected program. Operators can easily identify which bend is currently being executed and monitor the overall production sequence.<\/p>\n\n\n\n Axis Position Display<\/strong><\/p>\n\n\n\n The left side of the screen shows the real-time positions of the machine axes. These values allow operators to compare the programmed targets with the actual machine positions before and during execution.<\/p>\n\n\n\n Material and Tooling Data<\/strong><\/p>\n\n\n\n The interface also displays key production parameters, including:<\/p>\n\n\n\n Before starting automatic operation, verify that all displayed values match the production requirements.<\/p>\n\n\n\n Before executing a program, several checks should be completed to ensure safe and accurate operation.<\/p>\n\n\n\n Verify Program Data<\/strong><\/p>\n\n\n\n Confirm that the correct bending program has been loaded and that all bend steps have been programmed correctly.<\/p>\n\n\n\n Check Tooling Configuration<\/strong><\/p>\n\n\n\n Ensure that the installed punch and die correspond to the tooling specified in the program. Incorrect tooling may lead to inaccurate bends or machine interference.<\/p>\n\n\n\n Confirm Axis Positions<\/strong><\/p>\n\n\n\n The current axis positions are automatically added to the numerical entry data when entering ESA S929 Automatic Mode. If necessary, operators can modify the program data directly from the automatic interface before starting the cycle.<\/p>\n\n\n\n Completing these checks helps minimize setup errors and improves production reliability.<\/p>\n\n\n\n Once all preparations have been completed, the bending cycle can begin.<\/p>\n\n\n\n Press the green Start button located on the automatic operation screen.<\/p>\n\n\n\n After the command is issued, the backgauge axes automatically move to their programmed positions.<\/p>\n\n\n\n When the backgauges reach the target position, press the down foot pedal to lower the ram and perform the bending operation.<\/p>\n\n\n\n The controller executes the programmed bend according to the parameters stored in the ESA S929 Numeric Program.<\/p>\n\n\n\n After the bend is completed, the ram automatically returns to its upper position.<\/p>\n\n\n\n At the same time, the backgauge axes reposition themselves for the next programmed bend without requiring manual intervention.<\/p>\n\n\n\n ESA S929 Automatic Mode is designed to execute complete multi-bend programs automatically.<\/p>\n\n\n\n After one bend is completed:<\/p>\n\n\n\n Operators only need to reposition the workpiece and activate the foot pedal when appropriate, allowing production to continue efficiently through the entire program.<\/p>\n\n\n\n When the final bend in the program has been completed, the ESA S929 controller automatically returns to the first bend of the program.<\/p>\n\n\n\n This feature is particularly useful for batch production because it allows repeated manufacturing of identical parts without reloading the program.<\/p>\n\n\n\n During automatic operation, operators should continuously observe the machine status and displayed parameters.<\/p>\n\n\n\n Pay particular attention to:<\/p>\n\n\n\n Monitoring these values helps identify potential setup issues before they affect production quality.<\/p>\n\n\n\n For maximum efficiency and safety, always verify the program data before entering ESA S929 Automatic Mode. Confirm that the correct punch and die are installed, ensure material specifications match the programmed values, and check that the backgauge reaches its target position before initiating each bend.<\/p>\n\n\n\n When running batch production, periodically inspect finished parts to verify bending accuracy and make corrections if necessary. Combining proper program preparation with careful monitoring allows operators to take full advantage of ESA S929 Automatic Mode while maintaining consistent and reliable production performance.<\/p>\n\n\n\n Before starting, verify that the correct bending program is loaded, the installed punch and die match the program settings, the material parameters are correct, and the backgauge positions are appropriate for the selected bend.<\/p>\n\n<\/div>\n<\/div>\n After the bending operation finishes, the ram automatically returns to its upper position, and the backgauge axes move to the next programmed location. The controller then prepares the following bend for execution.<\/p>\n\n<\/div>\n<\/div>\n Yes. The current axis targets are added to the numerical entry data when entering automatic mode, and certain program parameters can be modified directly from the automatic status interface if adjustments are required.<\/p>\n\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n ESA S929 Automatic Mode provides an efficient and reliable way to execute bending programs by automating the movement of the ram and backgauge according to predefined program data. By understanding how to access the automatic interface, verify program settings, start the bending cycle, and monitor machine operation, operators can significantly improve production efficiency and maintain consistent bending quality.<\/p>\n\n\n\n Before every production run, it is recommended to confirm the selected program, tooling configuration, material parameters, and axis positions to minimize setup errors and ensure safe operation. Regular monitoring during automatic execution and routine inspection of finished parts can further enhance productivity and process stability.<\/p>\n\n\n\n If you need additional guidance on ESA S929 Automatic Mode, controller operation, or press brake programming, feel free to contact the HARSLE technical support team. You can also explore more HARSLE documentation and training resources to learn advanced programming techniques and optimize your bending workflow.<\/p>","protected":false},"excerpt":{"rendered":" ESA S929 Automatic Mode is designed to streamline press brake production by allowing operators to execute programmed bending sequences automatically<\/p>","protected":false},"author":32,"featured_media":86063,"comment_status":"open","ping_status":"closed","template":"","meta":{"footnotes":""},"doc_category":[3249],"doc_tag":[5708,3409,5673],"knowledge_base":[3228],"class_list":["post-85916","docs","type-docs","status-publish","has-post-thumbnail","hentry","doc_category-system-operation","doc_tag-automatic-mode-esa-s929","doc_tag-cnc-press-brake-controller","doc_tag-esa-s929","knowledge_base-press-brake"],"year_month":"2026-06","word_count":1132,"total_views":"9","reactions":{"happy":"0","normal":"0","sad":"0"},"author_info":{"name":"Krystyna","author_nicename":"christina","author_url":"https:\/\/www.harsle.com\/pl\/author\/christina\/"},"doc_category_info":[{"term_name":"System Operation","term_url":"https:\/\/www.harsle.com\/pl\/docs\/hydraulic-press\/system-operation\/"}],"doc_tag_info":[{"term_name":"automatic mode","term_url":"https:\/\/www.harsle.com\/pl\/docs-tag\/automatic-mode-esa-s929\/"},{"term_name":"CNC Press Brake Controller","term_url":"https:\/\/www.harsle.com\/pl\/docs-tag\/cnc-press-brake-controller\/"},{"term_name":"ESA S929","term_url":"https:\/\/www.harsle.com\/pl\/docs-tag\/esa-s929\/"}],"jetpack_sharing_enabled":true,"knowledge_base_info":[{"term_name":"Press Brake","term_url":"https:\/\/www.harsle.com\/pl\/docs\/press-brake\/","term_slug":"press-brake"}],"knowledge_base_slug":["press-brake"],"_links":{"self":[{"href":"https:\/\/www.harsle.com\/pl\/wp-json\/wp\/v2\/docs\/85916","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.harsle.com\/pl\/wp-json\/wp\/v2\/docs"}],"about":[{"href":"https:\/\/www.harsle.com\/pl\/wp-json\/wp\/v2\/types\/docs"}],"author":[{"embeddable":true,"href":"https:\/\/www.harsle.com\/pl\/wp-json\/wp\/v2\/users\/32"}],"replies":[{"embeddable":true,"href":"https:\/\/www.harsle.com\/pl\/wp-json\/wp\/v2\/comments?post=85916"}],"version-history":[{"count":3,"href":"https:\/\/www.harsle.com\/pl\/wp-json\/wp\/v2\/docs\/85916\/revisions"}],"predecessor-version":[{"id":86064,"href":"https:\/\/www.harsle.com\/pl\/wp-json\/wp\/v2\/docs\/85916\/revisions\/86064"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.harsle.com\/pl\/wp-json\/wp\/v2\/media\/86063"}],"wp:attachment":[{"href":"https:\/\/www.harsle.com\/pl\/wp-json\/wp\/v2\/media?parent=85916"}],"wp:term":[{"taxonomy":"doc_category","embeddable":true,"href":"https:\/\/www.harsle.com\/pl\/wp-json\/wp\/v2\/doc_category?post=85916"},{"taxonomy":"doc_tag","embeddable":true,"href":"https:\/\/www.harsle.com\/pl\/wp-json\/wp\/v2\/doc_tag?post=85916"},{"taxonomy":"knowledge_base","embeddable":true,"href":"https:\/\/www.harsle.com\/pl\/wp-json\/wp\/v2\/knowledge_base?post=85916"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}![\"ESA](\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/06\/image-62.png\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/06\/image-63.png\")
<\/figure>\n\n\n\nUnderstanding the ESA S929 Automatic Mode Interface<\/h2>\n\n\n\n
\n
Preparing to Run ESA S929 Automatic Mode<\/h2>\n\n\n\n
How to Start Automatic Cycle Execution<\/h2>\n\n\n\n
Step 1: Press the Start Button<\/h3>\n\n\n\n
![\"\"](\"https:\/\/www.harsle.com\/wp-content\/uploads\/2026\/06\/image-64.png\")
<\/figure>\n\n\n\nStep 2: Operate the Foot Pedal<\/h3>\n\n\n\n
Step 3: Automatic Return<\/h3>\n\n\n\n
Continuous Program Execution in ESA S929 Automatic Mode<\/h2>\n\n\n\n
\n
Automatic Restart After the Final Bend<\/h3>\n\n\n\n
Monitoring Program Execution<\/h2>\n\n\n\n
\n
Best Practices for Using ESA S929 Automatic Mode<\/h2>\n\n\n\n
Cz\u0119sto zadawane pytania (FAQ)<\/h2>\n\n\n
What should I check before starting ESA S929 Automatic Mode?<\/h3>\n
What happens after one bend is completed?<\/h3>\n
Can I modify program data while using ESA S929 Automatic Mode?<\/h3>\n
Wniosek<\/h2>\n\n\n\n