WC67K-100T3200 NC Hydraulic press brake with E21
You are here: Home » Showroom » Video Gallery » Press Brake » WC67K-100T3200 NC Hydraulic press brake with E21

WC67K-100T3200 NC Hydraulic press brake with E21

Views: 126     Author: Site Editor     Publish Time: 2018-04-11      Origin: Site



1.Fast ram decent speed.

2.SIEMENS low noise motor

3.SCHNEIDER high quality electric components

4.E21 NC programming controller

5.100tons pressing force, 3200mm Max bending length.

6.Inox hydraulic metal sheet bending machine

7.KACON Foot switch with emergency stop 

8.Frequency inverter for backgauge motor

9.REXROTH Hydraulic valve with high quality

The hydraulic bending machine includes a bracket, a worktable, and a clamping plate. The worktable is placed on the bracket. The worktable is composed of a base and a pressure plate. The base is connected to the clamping plate by a hinge. The base is composed of a seat shell, a coil, and a cover plate. The coil is placed in the recess of the seat shell, and the top of the recess is covered with a cover plate. When in use, the coil is energized by the wire, and after the electricity is energized, a gravitational force is generated on the pressure plate, to realize the clamping of the thin plate between the pressure plate and the base. Due to the use of electromagnetic force clamping, the pressing plate can be made into various workpiece requirements, and the workpiece with sidewalls can be processed.


Get A Quote
Copyright  2023 Nanjing Harsle Machine Tool Co. Ltd. All rights reserved.