When I assess Walzmaschine Kapazität for a new project, my top priority is making sure it aligns precisely with the plate thickness I need to work with. Using a machine that’s mismatched for the material can result in inaccurate forming, excessive scrap, or even serious damage to the equipment. In this article, I’ll walk you through how to effectively match rolling machine capacity with various plate thicknesses by reviewing critical specifications, understanding material strength, and applying practical adjustment techniques.

Understanding Rolling Machine Capacity Ratings

What Capacity Ratings Really Mean

When I look at a machine spec sheet, the rated capacity typically reflects the maximum thickness and width the machine can roll in mild steel (usually around 250 MPa yield strength). However, this doesn’t mean the machine can roll any type of material at those numbers. Capacity must be adjusted depending on material type, length, and yield strength.

Yield Strength Adjustment for Accurate Matching

If I’m working with stainless steel or high-tensile alloys, I always apply a correction factor. For instance, if a machine is rated for 20 mm thick mild steel, it might only handle 12–14 mm of 304 stainless steel. Understanding these adjustments helps me avoid overloading the machine or producing inaccurate rolls.

Matching Plate Thickness with Machine Type

3-Roll vs. 4-Roll Machines

I often choose a 4-roll machine when working with thinner plates that require high precision or pre-bending. These machines can clamp and roll in a single pass. For thicker plates above 20 mm, a 3-roll variable geometry machine provides greater forming force and flexibility for custom radii.

Minimum and Maximum Thickness Guidelines

Each rolling machine has a practical thickness range. A machine that excels at rolling 5 mm plate might struggle with consistent performance at 0.8 mm or 20 mm. I check both the minimum rolling thickness Und maximum rolling capacity when selecting equipment for varied production needs.

Material Width and Cylinder Diameter Considerations

Wider Plates Require Higher Torque

When rolling wider materials (e.g., 2,500 mm+), torque demand increases significantly. Even if the thickness is moderate, a wider plate exerts more resistance across the rolls. That’s why I always factor in plate width as well as thickness when evaluating rolling machine capacity.

Small Diameter Rolls and Thin Sheets

Thin plates (under 2 mm) often require smaller-diameter top rolls to create tight bends without wrinkling. Machines designed for light-gauge rolling usually come with specialized components that help control sheet feed and minimize surface marking.

Real-World Matching Techniques

Using a Capacity Chart

Artikel	UNIT	W12-6*1500	W12-6*2000	W12-6*3000	W12-8*1500	W12-8*2000
Max. Walzdicke	mm	6	6	6	8	8
Max Pre-rolling Thickness	mm	5	5	5	6	6
Max. Rollblechlänge	mm	1500	2000	3000	1500	2000
Durchmesser der oberen Walze	mm	170	190	230	190	210
Unterer Rollendurchmesser	mm	160	170	210	170	190
Durchmesser der Seitenrollen	mm	140	150	180	150	170
Min. Walzdurchmesser	mm	250	280	320	280	300
Rollgeschwindigkeit	m/min	4	4	4	4	4
Motorleistung	kw	4	5.5	7.5	5.5	5.5
Oil Tank Volume	L	150	150	180	150	150
Dimension (L*W*H)	mm	3500	4000	5100	3500	4150
	mm	1350	1380	1450	1350	1380
	mm	1200	1200	1350	1250	1300

Most machines include a rolling chart that maps maximum thickness vs. width for different materials. I refer to this chart before loading a new job, especially when switching from carbon steel to stainless or aluminum.

Practical De-Rating Formula

I apply a general rule of thumb when converting mild steel capacity to other materials:

• Stainless Steel: Reduce rated thickness by 30–50%
• Aluminum: Increase rated thickness by 30% (due to lower yield strength)
  This helps me avoid overloading the system while preserving machine longevity.

FAQs

Properly matching Walzmaschine capacity with the plate thickness you’re working with is critical to successful, safe, and efficient forming. By understanding machine specs, material strength, and de-rating principles, I can confidently select or adjust equipment for every project—whether it’s thin stainless ducting or thick steel flanges. For help choosing the right model or requesting a customized capacity chart, contact our HARSLE technical team anytime. We’re here to ensure your rolling process stays smooth and cost-effective.