Industry Solutions · Automotive Parts & Vehicles

Sheet Metal Machines for Automotive Parts Manufacturing

Brackets, chassis parts, battery trays and tube frames — forming, cutting and joining equipment for vehicle suppliers.

Car body assembly line with welding robots

الخطوة 1Cutting & Blanking
الخطوة 2Bending & Forming
الخطوة 3Welding & Finishing
الخطوة 4Automation & Tooling

Automotive Manufacturing Basics

How Automotive Parts & Vehicles Are Made

Automotive sheet metal parts are made from high-strength steel, galvanized steel and aluminum, mostly 0.8–4 mm thick. Blanks are laser cut, sheared or punched, formed by stamping and deep drawing on hydraulic presses or bent on CNC press brakes, tubes are shaped on tube benders, and parts are laser welded into assemblies.

Tier suppliers balance high volumes with frequent model changes, so they combine dedicated stamping for large runs with flexible laser cutting and press brake bending for prototypes, spare parts, trucks, buses and EV components.

Typical Parts & Materials

Brackets & reinforcementsMulti-bend formed parts with hole patternsHigh-strength steel 1.5–3.0 mm
Chassis & frame membersLong profiles, heavy bendsHigh-strength steel 2.0–6.0 mm
EV battery trays & coversLarge boxes, sealed seamsAluminum / steel 1.5–4.0 mm
Exhaust & fluid linesPrecise 3D tube bendsStainless / steel tube
Seat & body-in-white partsDeep-drawn and stamped shapesGalvanized / HSLA steel 0.8–2.0 mm

Manufacturing Process

From Flat Sheet to Finished Part

Select a stage to see what happens and which HARSLE machines do the work.

الخطوة 1Automotive Parts & Vehicles

Cutting & Blanking

Fiber lasers cut prototype and low-volume blanks and trim formed parts; shears and punching presses produce high-volume blanks and holes.

آلة القطع بالليزر

60 models in the HARSLE range.

آلة القص

43 models in the HARSLE range.

آلة اللكم

92 models in the HARSLE range.

Recommended Machines

Machines for Automotive Parts & Vehicles

Live from the HARSLE product range — models suited to automotive manufacturing are listed first.

View all 60 Laser Cutting Machine models

Challenges & Solutions

What Matters in Automotive Manufacturing

High-strength steels
Higher tonnage and springback compensation on CNC press brakes keep angles accurate on HSLA and AHSS.
Repeatability at volume
CNC back gauges, servo presses and automation reproduce parts identically across shifts.
Fast model changes
Laser cutting and offline-programmed bending avoid hard tooling for low-volume and prototype parts.
Lightweighting
Aluminum forming and laser welding support lighter EV battery trays and body parts.

Automate Bending

Panel Bender for Automotive Manufacturing

A HARSLE panel bender clamps the sheet flat and forms all four sides in one cycle with universal tooling — ideal for the repeat panels, doors and boxes found in automotive parts & vehicles.

Bending length 1400–3000 mm (AutoBend)
0–180° bending angle, 0.2 s per bend
Minimal operator skill, fast changeovers

Explore panel benders

البصمة العالمية

Shipments & Customer Stories

Every shipment and customer story HARSLE publishes appears here automatically. Filter by machine or country.

1,209Shipments published
118Destination countries
118Customer stories
LiveUpdated as we ship

All 1,209 shipments

Knowledge Center

Automotive Manufacturing Guides

التعليمات

الأسئلة الشائعة

Common questions about machines and processes for automotive parts & vehicles.

Ask our engineers

Which machines are used to make automotive sheet metal parts?

Hydraulic presses for stamping and deep drawing, CNC press brakes for brackets and frame members, fiber laser cutting machines and shears for blanks, tube bending machines for exhaust and seat tubes, and laser welding for assemblies.

Can a press brake bend high-strength automotive steel?

Yes. Choose enough tonnage (high-strength steel can need 1.5–2× the force of mild steel), a wider V-die and a CNC controller with springback compensation.

Stamping or press brake bending for car parts?

Stamping on a hydraulic or mechanical press is fastest for high volumes once dies are made; press brake bending needs no dedicated die and suits prototypes, trucks, buses and smaller batches.

How are EV battery trays made?

Battery trays are typically cut from aluminum or steel sheet, bent or stamped into a tray, and sealed by laser or friction-stir welding before coating and leak testing.

More Applications