Industry Solutions · Medical & Laboratory Equipment

Sheet Metal Machines for Medical Equipment Manufacturing

Precise, clean and cosmetic — equipment for device housings, hospital carts and laboratory furniture.

Plan Your Line See the Machines
Hospital bed and medical equipment in a ward
  1. Fase 1Cutting & Blanking
  2. Fase 2Bending & Forming
  3. Fase 3Welding & Finishing
  4. Fase 4Automation & Tooling

Medical Equipment Basics

How Medical & Laboratory Equipment Are Made

Medical equipment housings, carts and laboratory furniture are made from stainless steel 304/316, aluminum and coated steel, typically 1.0–3.0 mm. Parts are laser cut or punched, bent with tight tolerances on press brakes and panel benders, tube frames are bent on tube benders, and joints are laser welded and finished to a smooth, cleanable surface.

Medical manufacturers work to documented quality systems, so repeatable CNC processes, traceable programs and cosmetic, burr-free surfaces matter as much as speed.

Recommended machinesPanel bender solutions

Typical Parts & Materials

  • Device housings & coversTight tolerances, cosmetic facesAluminum / coated steel 1.0–2.0 mm
  • Hospital carts & trolleysBent trays, tube framesStainless 304, 1.0–1.5 mm + tube
  • Cabinets & sterile storageHemmed doors, sealed seamsStainless 304/316, 1.0–1.5 mm
  • Bed & stretcher framesBent tubes and bracketsStainless / steel tube 1.5–3.0 mm
  • Laboratory furnitureBenches, fume hood panelsStainless / coated steel 1.0–2.0 mm

Manufacturing Process

From Flat Sheet to Finished Part

Select a stage to see what happens and which HARSLE machines do the work.

Fase 1Medical & Laboratory Equipment

Cutting & Blanking

Fiber lasers cut precise contours with clean edges; punching handles perforations and repeated holes; shears and notchers prepare blanks.

Macchina per il taglio laser

60 models in the HARSLE range.

Punzonatrice

92 models in the HARSLE range.

Macchina per taglio

43 models in the HARSLE range.

Macchina per intaglio

15 models in the HARSLE range.

Recommended Machines

Machines for Medical & Laboratory Equipment

Live from the HARSLE product range — models suited to medical equipment are listed first.

Challenges & Solutions

What Matters in Medical Equipment

  • Tight, repeatable tolerances

    CNC back gauges, angle programs and automatic bending reproduce parts identically from batch to batch.

  • Cleanable, burr-free surfaces

    Deburring and laser welding minimize crevices where contamination could collect.

  • Cosmetic finish

    Protective film and mark-free tooling preserve brushed and coated surfaces.

  • Small batches, many variants

    Offline programming and laser cutting make short runs economical.

HARSLE AutoBend panel bender

Automate Bending

Panel Bender for Medical Equipment

A HARSLE panel bender clamps the sheet flat and forms all four sides in one cycle with universal tooling — ideal for the repeat panels, doors and boxes found in medical & laboratory equipment.

  • Bending length 1400–3000 mm (AutoBend)
  • 0–180° bending angle, 0.2 s per bend
  • Minimal operator skill, fast changeovers
Explore panel benders

Impronta globale

Shipments & Customer Stories

Every shipment and customer story HARSLE publishes appears here automatically. Filter by machine or country.

  • 1,209Shipments published
  • 118Destination countries
  • 118Customer stories
  • LiveUpdated as we ship
All 1,209 shipments

Knowledge Center

Medical Equipment Guides

Domande frequenti

Domande frequenti

Common questions about machines and processes for medical & laboratory equipment.

Ask our engineers

Which sheet metal machines are used for medical equipment?

Fiber laser cutting machines, CNC punching machines, press brakes and panel benders, tube benders for frames, laser welding and deburring/polishing equipment.

What materials are used for medical carts and cabinets?

Mostly stainless steel 304 or 316 for cleanability and corrosion resistance, plus aluminum and powder-coated steel for device housings.

Why is laser welding preferred for medical parts?

Laser welds are narrow with low heat input, so stainless parts distort less, discolor less and need less grinding to reach a smooth, hygienic finish.

Can press brakes hold the tolerances medical housings need?

Yes. CNC press brakes with accurate back gauges, crowning and angle programs repeat bends within tight tolerances; panel benders add consistency for box-shaped housings.

How are hospital bed and stretcher frames made?

Steel or stainless tubes are cut, bent on CNC tube benders, notched and welded into frames, then finished or coated.

More Applications

Other Industries We Equip

Inizia subito

Richiedi un preventivo

Tell us about your medical & laboratory equipment — our engineers will recommend the machines and layout.

  • Selezione della macchinaModel, series and options matched to your parts
  • Supporto tecnicoBend feasibility checked on your drawings
  • Preventivo dettagliatoPrice, lead time, shipping and installation
  • Risposta entro 24 oreA real engineer replies within one business day

Tip: mention your material, thickness, largest part size and yearly volume for the most accurate quote.