Kitchen Equipment Manufacturing Machines - Stainless Steel Fabrication

Kitchen Equipment Basics

How Commercial Kitchen & Food Service Equipment Are Made

Commercial kitchen equipment is built from stainless steel 304 (0.8–2.0 mm). Blanks are laser cut or sheared, V-grooved for sharp worktop edges, bent on panel benders and press brakes, sinks and bowls are deep drawn on hydraulic presses, and seams are laser welded and polished so surfaces are smooth and easy to clean.

Food-service fabricators need hygienic, gap-free joints and a cosmetic finish on every visible surface, while handling many custom sizes — so accurate cutting, mark-free bending and low-distortion welding matter more than raw tonnage.

Typical Parts & Materials

Worktables & countersSharp front edges, backsplashes, sound-deadened topsStainless 304, 1.0–1.5 mm
Sinks & bowlsDeep-drawn or welded bowlsStainless 304, 0.8–1.2 mm
Hoods & canopiesLarge panels with hems and filtersStainless 430/304, 0.8–1.2 mm
Cabinets, shelves & doorsBox parts with return flangesStainless 304/430, 0.8–1.2 mm
Frames & legsTube frames and bent profilesStainless tube / sheet 1.2–2.0 mm

Manufacturing Process

From Flat Sheet to Finished Part

Select a stage to see what happens and which HARSLE machines do the work.

Paso 1Commercial Kitchen & Food Service Equipment

Cutting & Blanking

Fiber lasers cut custom blanks; shears cut high-volume strips; V-grooving machines prepare sharp worktop edges; punching adds vents and holes.

Máquina de corte por láser

60 models in the HARSLE range.

Máquina de corte

43 models in the HARSLE range.

Máquina ranuradora en V

12 models in the HARSLE range.

Máquina punzonadora

92 models in the HARSLE range.

Máquina de entallar

15 models in the HARSLE range.

Recommended Machines

Machines for Commercial Kitchen & Food Service Equipment

Live from the HARSLE product range — models suited to kitchen equipment are listed first.

View all 60 Laser Cutting Machine models

Challenges & Solutions

What Matters in Kitchen Equipment

Hygienic, seamless joints
Laser welding gives narrow welds that are easy to grind and polish flush.
Mark-free stainless surfaces
Protective film, nylon die inserts and panel benders that keep sheets supported avoid scratches.
Custom sizes every day
Laser cutting and CNC programming make one-off worktables as efficient as batches.
Deep-drawn sinks
Hydraulic presses with controlled speed and blank holding draw bowls without wrinkles or tearing.

Automate Bending

Doblador de paneles para equipos de cocina

A HARSLE panel bender clamps the sheet flat and forms all four sides in one cycle with universal tooling — ideal for the repeat panels, doors and boxes found in commercial kitchen & food service equipment.

Bending length 1400–3000 mm (AutoBend)
0–180° bending angle, 0.2 s per bend
Minimal operator skill, fast changeovers

Explore panel benders

Huella global

Shipments & Customer Stories

Every shipment and customer story HARSLE publishes appears here automatically. Filter by machine or country.

1,209Shipments published
118Destination countries
118Customer stories
LiveUpdated as we ship

All 1,209 shipments

Knowledge Center

Kitchen Equipment Guides

Preguntas frecuentes

Common questions about machines and processes for commercial kitchen & food service equipment.

Ask our engineers

What machines do I need to make stainless steel kitchen equipment?

A fiber laser or shear for blanks, a V-grooving machine for sharp worktop edges, a press brake and/or panel bender for bending, a hydraulic press for deep-drawn sinks, laser welding and a deburring/polishing machine.

Why use laser welding for kitchen equipment?

Laser welding uses little heat, so stainless parts distort and discolor less and the narrow seams are quicker to grind and polish to a hygienic finish.

How are stainless steel sinks made?

Sink bowls are deep drawn on a hydraulic press using a punch, die and blank holder, or fabricated from bent sheet and welded; the bowl is then welded into the worktop.

What stainless grade is used for commercial kitchens?

AISI 304 is the standard for food-contact surfaces; 430 is often used for non-contact panels such as hoods and cabinet backs.

Can a panel bender handle stainless steel?

Yes. Panel benders process stainless steel; the maximum thickness is lower than for mild steel (for example 1.0–2.0 mm stainless depending on the series), so check the model capacity for your parts.

More Applications