Industry Solutions · Pressure Vessels, Tanks & Oil and Gas

Machines for Pressure Vessels, Tanks, Containers & Oil and Gas Equipment

Shells, heads, tanks and containers — heavy rolling and pressing for vessels and oil & gas equipment.

Paso 1Cutting & Blanking
Paso 2Bending & Forming
Paso 3Welding & Finishing
Paso 4Automation & Tooling

Pressure Vessels & Tanks Basics

How Pressure Vessels, Tanks & Oil and Gas Are Made

Pressure vessels and tanks are made from carbon steel, stainless steel and alloy plate, typically 6–100 mm thick, while drums and containers use thinner sheet. Plates are cut, rolled into cylindrical and conical shells on plate rolling machines, heads are pressed or spun, nozzles and saddles are formed on presses and press brakes, and everything is welded to code.

Roundness, accurate pre-bent ends and repeatable heads are critical because they determine weld fit-up and inspection results.

Typical Parts & Materials

Cylindrical & conical shellsRolled with pre-bent endsCarbon / stainless plate 6–100 mm
Dished & flanged headsPressed or spunPlate 4–60 mm
Storage tanksLarge rolled coursesSteel plate 5–25 mm
Drums, cans & containersDeep-drawn or rolledSteel / stainless sheet 0.5–2.0 mm
Saddles, supports & skidsBent and cut platesSteel plate 8–30 mm

Manufacturing Process

From Flat Sheet to Finished Part

Select a stage to see what happens and which HARSLE machines do the work.

Paso 1Pressure Vessels, Tanks & Oil and Gas

Cutting & Blanking

Heavy shears, plasma and laser cutting machines produce plate blanks and nozzle openings.

Máquina de corte

43 models in the HARSLE range.

Máquina de corte por plasma

1 models in the HARSLE range.

Máquina de corte por láser

60 models in the HARSLE range.

Recommended Machines

Machines for Pressure Vessels, Tanks & Oil and Gas

Live from the HARSLE product range — models suited to pressure vessels & tanks are listed first.

View all 43 Shearing Machine models

Challenges & Solutions

What Matters in Pressure Vessels & Tanks

Roundness & fit-up
CNC 4-roll machines pre-bend both ends so longitudinal seams close without flat spots.
Thick, high-strength plate
Heavy rolling capacity and hydraulic presses handle thick alloy plate.
Code compliance
Repeatable forming supports consistent weld preparation and inspection.
Container volumes
Deep-drawing presses produce drums and cans efficiently.

Automate Bending

Panel Bender for Pressure Vessels & Tanks

A HARSLE panel bender clamps the sheet flat and forms all four sides in one cycle with universal tooling — ideal for the repeat panels, doors and boxes found in pressure vessels, tanks & oil and gas.

Bending length 1400–3000 mm (AutoBend)
0–180° bending angle, 0.2 s per bend
Minimal operator skill, fast changeovers

Explore panel benders

Huella global

Shipments & Customer Stories

Every shipment and customer story HARSLE publishes appears here automatically. Filter by machine or country.

1,209Shipments published
118Destination countries
118Customer stories
LiveUpdated as we ship

All 1,209 shipments

Knowledge Center

Pressure Vessels & Tanks Guides

Preguntas frecuentes

Common questions about machines and processes for pressure vessels, tanks & oil and gas.

Ask our engineers

Which rolling machine is best for pressure vessel shells?

A CNC 4-roll plate rolling machine pre-bends both plate ends in one setup and repeats the radius accurately, which gives better roundness and seam fit-up on thick plate.