Industry Solutions · Pressure Vessels, Tanks & Oil and Gas

Machines for Pressure Vessels, Tanks, Containers & Oil and Gas Equipment

Shells, heads, tanks and containers — heavy rolling and pressing for vessels and oil & gas equipment.

Plan Your Line See the Machines
Stainless steel storage tanks
  1. Passo 1Cutting & Blanking
  2. Passo 2Bending & Forming
  3. Etapa 3Welding & Finishing
  4. Passo 4Automation & Tooling

Pressure Vessels & Tanks Basics

How Pressure Vessels, Tanks & Oil and Gas Are Made

Pressure vessels and tanks are made from carbon steel, stainless steel and alloy plate, typically 6–100 mm thick, while drums and containers use thinner sheet. Plates are cut, rolled into cylindrical and conical shells on plate rolling machines, heads are pressed or spun, nozzles and saddles are formed on presses and press brakes, and everything is welded to code.

Roundness, accurate pre-bent ends and repeatable heads are critical because they determine weld fit-up and inspection results.

Recommended machinesPanel bender solutions

Typical Parts & Materials

  • Cylindrical & conical shellsRolled with pre-bent endsCarbon / stainless plate 6–100 mm
  • Dished & flanged headsPressed or spunPlate 4–60 mm
  • Storage tanksLarge rolled coursesSteel plate 5–25 mm
  • Drums, cans & containersDeep-drawn or rolledSteel / stainless sheet 0.5–2.0 mm
  • Saddles, supports & skidsBent and cut platesSteel plate 8–30 mm

Manufacturing Process

From Flat Sheet to Finished Part

Select a stage to see what happens and which HARSLE machines do the work.

Passo 1Pressure Vessels, Tanks & Oil and Gas

Cutting & Blanking

Heavy shears, plasma and laser cutting machines produce plate blanks and nozzle openings.

Máquina de cisalhamento

43 models in the HARSLE range.

Máquina de corte a plasma

1 models in the HARSLE range.

Máquina de corte a laser

60 models in the HARSLE range.

Recommended Machines

Machines for Pressure Vessels, Tanks & Oil and Gas

Live from the HARSLE product range — models suited to pressure vessels & tanks are listed first.

Challenges & Solutions

What Matters in Pressure Vessels & Tanks

  • Roundness & fit-up

    CNC 4-roll machines pre-bend both ends so longitudinal seams close without flat spots.

  • Thick, high-strength plate

    Heavy rolling capacity and hydraulic presses handle thick alloy plate.

  • Code compliance

    Repeatable forming supports consistent weld preparation and inspection.

  • Container volumes

    Deep-drawing presses produce drums and cans efficiently.

HARSLE AutoBend panel bender

Automate Bending

Panel Bender for Pressure Vessels & Tanks

A HARSLE panel bender clamps the sheet flat and forms all four sides in one cycle with universal tooling — ideal for the repeat panels, doors and boxes found in pressure vessels, tanks & oil and gas.

  • Bending length 1400–3000 mm (AutoBend)
  • 0–180° bending angle, 0.2 s per bend
  • Minimal operator skill, fast changeovers
Explore panel benders

Presença global

Shipments & Customer Stories

Every shipment and customer story HARSLE publishes appears here automatically. Filter by machine or country.

  • 1,209Shipments published
  • 118Destination countries
  • 118Customer stories
  • LiveUpdated as we ship
All 1,209 shipments

Knowledge Center

Pressure Vessels & Tanks Guides

PERGUNTAS FREQUENTES

Perguntas frequentes

Common questions about machines and processes for pressure vessels, tanks & oil and gas.

Ask our engineers

Which rolling machine is best for pressure vessel shells?

A CNC 4-roll plate rolling machine pre-bends both plate ends in one setup and repeats the radius accurately, which gives better roundness and seam fit-up on thick plate.

How are vessel heads made?

Dished and flanged heads are pressed on large hydraulic presses or spun and flanged on dedicated machines, then trimmed and beveled for welding.

How are metal drums and containers formed?

Drum bodies are rolled and seam-welded or deep drawn on hydraulic presses; ends are pressed and joined by seaming or welding.

What thickness can HARSLE rolling machines handle?

HARSLE QuadRoll 4-roll machines handle plates up to about 200 mm depending on width and material.

More Applications

Other Industries We Equip

Comece agora

Solicite um orçamento

Tell us about your pressure vessels, tanks & oil and gas — our engineers will recommend the machines and layout.

  • Seleção de MáquinasModel, series and options matched to your parts
  • Suporte técnicoBend feasibility checked on your drawings
  • Cotação detalhadaPrice, lead time, shipping and installation
  • Resposta em 24 horasA real engineer replies within one business day

Tip: mention your material, thickness, largest part size and yearly volume for the most accurate quote.