DoorPress
Up to 3000 tons of hydraulic force for deep, crisp steel door embossing.
Door Panel Embossing
Fast, Reliable Embossing
A high-performance hydraulic forming system built specifically to create surface textures on metal door panels. Precisely aligned upper and lower molds apply uniform pressure to the sheet, producing crisp, three-dimensional patterns with stable, repeatable results — for every pattern, texture and structural design you need.
- High-pressure hydraulic system
- Precise embossing control
- Wide application
- High security
High Precision
Precisely aligned upper and lower molds for sharp, accurate patterns.
Stable Forming
Uniform pressure across the whole sheet, panel after panel.
Long Service
Chrome-plated cylinders and imported seals for a longer lifetime.
Easy Operation
PLC control with an optional touchscreen for intuitive operation.
Core Components
Oil Cylinder
The link between hydraulic control and the machine. Every cylinder is designed with computer-aided calculations and drawings and built in our own dedicated factory.
Plunger Cylinder
Each DoorPress runs six plunger cylinders, built from a cylinder barrel, plunger and guide bushing. The multi-cylinder layout spreads force evenly over the full mold for consistent embossing depth across the panel.
Seal Rings
Seal rings seal the cylinder on the piston or rod to prevent medium leakage and keep the press working properly under all conditions. Oversized lips create linear force for a better seal. HARSLE uses high-quality imported seal rings in its hydraulic cylinders.
Chrome Coating
The cylinder rods are chrome-coated to protect the rod surface, giving a longer lifetime and a clean, shiny finish.
Automation
Hydraulics & Control
Automation in the pressing process improves efficiency, accuracy and operating convenience, and makes production more flexible and responsive.
Fast oil filling during the slide's idle stroke, stable high-pressure holding while forming, and high-volume discharge on return — for smooth, efficient embossing.
* Optional
From Coil to Embossing
Automation Solutions
Optional equipment that turns a single press into a continuous line — from coil unwinding and leveling to sheet cutting and precise feeding.
01 / 04
Uncoiler Machine *
Supports steel or aluminum coils on an expanding mandrel for smooth unwinding, working in tandem with leveling and feeding equipment.
Roller Straightener *
Precision rollers level the sheet for better flatness, driven by a three-phase motor and reducer with geared correction rollers.
Sheet Cutting Station *
Automatic conveying, positioning and high-precision cutting with smooth, burr-free edges — less manual work and less material waste.
Electronic CNC Feeder *
CNC-controlled sheet feeding with high positioning accuracy and stable performance for continuous production.
* Optional
Hydraulic Cushion *
Provides stable upward support during embossing, spreading pressure evenly across the panel. Ejector rods in the worktable move with the lower cylinders and work with the mold for border and pattern forming — reducing deformation, defects and material waste.
Vibration Reduction
Enhanced Precision
Increased Safety
Extended Lifespan
Efficiency Boost
* Optional. DoorPress Y27-3000T/1500T provides 15000 kN knock-out pressure.
Built to Last
Reliable Systems
Electric Parts
The central control hub for precise machine operation and easy maintenance monitoring, built with well-known brands such as Siemens or Schneider.
Lubrication System
Pull the handle to force grease to the lubrication points; release it and the spring-loaded piston refills the chamber. Simple, effortless and effective.
Fast, Reliable Embossing
Heavy-Duty Hydraulic Pressing for Crisp, Consistent Steel Door Panels
Applications
Embossed Door Panels
Embossed Door Panels
for Every Market
DoorPress embosses security, steel and stainless steel door panels — from clean geometric layouts to richly carved relief and framed patterns.
Security Doors
Security Doors
View Applications
Steel Entry Doors
Steel Entry Doors
View Applications
Stainless Steel Doors
Stainless Steel Doors
View Applications
Framed Pattern Panels
Framed Pattern Panels
View Applications
Custom Relief Patterns
Custom Relief Patterns
View Applications
Main & Secondary Doors
Main & Secondary Doors
View Applications
Technical Data
Specifications
All models at a glance — compare side by side
DoorPress
Y32-2000T
Y32-2000T
DoorPress
Y32-2500T
Y32-2500T
DoorPress
Y32-3000T
Y32-3000T
DoorPress
Y27-3000T/1500T
Y27-3000T/1500T
20000 kN
Nominal Force
25000 kN
Nominal Force
30000 kN
Nominal Force
30000 kN
Nominal Force
502 kN
Return Force
785 kN
Return Force
785 kN
Return Force
785 kN
Return Force
600 mm
Max. Daylight Opening
600 mm
Max. Daylight Opening
600 mm
Max. Daylight Opening
600 mm
Max. Daylight Opening
500 mm
Slide Stroke
500 mm
Slide Stroke
500 mm
Slide Stroke
500 mm
Slide Stroke
25 MPa
Max. Working Pressure
25 MPa
Max. Working Pressure
25 MPa
Max. Working Pressure
25 MPa
Max. Working Pressure
22×2 kW
Motor Power
22×1 + 30×1 kW
Motor Power
30×2 kW
Motor Power
30×2 kW
Motor Power
ZSG420×500×6pcs
Model of Plunger Cylinder
ZSG460×500×6pcs
Model of Plunger Cylinder
ZSG500×500×6pcs
Model of Plunger Cylinder
ZSG500×500×6pcs
Model of Plunger Cylinder
N46# Hydraulic Oil
Working Medium
N46# Hydraulic Oil
Working Medium
N46# Hydraulic Oil
Working Medium
N46# Hydraulic Oil
Working Medium
HY100Y×2
Oil Pump
HY100Y + HY160Y
Oil Pump
HY160Y×2
Oil Pump
HY160Y×2
Oil Pump
Get Started
Ready to
Ready to
Master Your
Production?
Get a personalized quote tailored to your exact specifications. Our engineering team will help you configure the perfect solution for your production needs.
What You'll Get
Machine Selection
Technical Support
Detailed Quotation
24-Hour Response
Request a Quote
Fill in the details below and we'll get back to you within 24 hours
