Views: 66 Author: Site Editor Publish Time: 2022-10-28 Origin: Site Inquire
I have introduced so much about the cleaning and maintenance of hydraulic presses because the sales of hydraulic press products have increased on a large scale as the year is approaching. The production process and operation of the large hydraulic press are difficult, so many customers will choose to place orders at this time of year, plus a long time for production, transportation, installation, commissioning, and use guidance after arrival, etc. Officially put into production use, it is just the beginning of a new year. Today, I will share with you the 2500T large hydraulic press exported to Mexico.
This is a facade embossing machine for making door panels. This hydraulic press is the standard export configuration of our company. The main motor is equipped with a servo motor. The size of the mold base is 2000*1000, and the mold core is 1709*589. The customer is from Mexico, and his company is a trader giant in North America. As a veteran trader who has been operating for many years, they pay special attention to the quality and performance of the products and the professionalism of the manufacturer. At first they expressed their requirements for finished products to us. Because we have rich experience in selling hydraulic presses, door embossing machines, etc., we have also exported the entire security door production line in Nigeria and other countries. Therefore, according to customer requirements, we accurately He recommended suitable machines and molds for him, and also made drawings for his reference.
Later, we showed the company's hydraulic press certificate, customer praise and other information to customers. After a series of inspections, comparisons and discussions, the customer finally determined that we would produce the machine for them, and expressed that if they were satisfied with the machine, they would sign a long-term agency agreement with our company in the future. Immediately after the customer paid a deposit, the machine was officially put into production. Adhering to our consistent belief of "making better machines for customers", our engineers have been very careful in all aspects of the machine. The fuselage adopts a three-beam and eight-column structure, which is mainly composed of the fuselage, hydraulic system, and control system. The hydraulic station adopts an independent fully enclosed control cabinet, which is safe and beautiful. Its size is 1.5 to 2 times that of other manufacturers, and it is equipped with air switches, relays, PLCs, etc., which greatly improves the safety of the control system; touch screen control, there are medium English and two languages are available, and the operation is intuitive and easy; the servo pump control system is adopted, which saves energy by more than 50%, has lower noise and higher efficiency; in addition, where problems are prone to occur, such as oil pipes and columns, we have made additional reinforcement and smoothing. , effectively improve the work efficiency and prolong the life of the machine.
After a series of design and production, the machine was finally completed, we installed the mold and debugged the machine, the first time to shoot the test video and sent photos to the customer, the customer is very satisfied, immediately contacted the shipping company, arranged to order the ship, the current hydraulic press is already on the way, I believe the Mexican trader will be very satisfied when receiving this 2500T hydraulic press.
Customer feedback photos: