Struggling with inconsistent bends? Prensa plegadora leveling is essential for achieving precise, high-quality results every time. Let’s master the technique for better bending.

Press brake leveling ensures consistent material thickness during bending. Mastering it allows for accurate, repeatable bends, reducing defects and increasing efficiency. Learn how to adjust and calibrate the leveling process for optimal results.

Next, we’ll walk through the step-by-step process of mastering press brake leveling to boost your bending precision.

Leveling a prensa plegadora before using it refers to the process of ensuring that the machine’s bed or bending surface is perfectly flat and parallel to the ram (the moving part that applies force to bend the material). leveling the press brake before use is critical for achieving high-quality, precise bends while maximizing safety and machine longevity.

Leveling a press brake is crucial for ensuring accurate bending and consistent results.

Leveling Steps

Check the Foundation: Ensure that the foundation of the press brake is solid and level. If the foundation is not level, it will be challenging to achieve accurate leveling.

Prepare the Press Brake: Make sure the press brake is turned off and that there are no materials on the bending surface.

Gather Leveling Tools: You’ll need a precision level, such as a bubble level or digital level, and shims.

Identify High Points: Using the precision level, identify the high points on the press brake bed. High points can cause inaccurate bending, so it’s essential to address them.

Adjust the Leveling Feet: Most press brakes come with leveling feet that can be adjusted to level the machine. Use the precision level to determine which feet need adjustment.

Add Shims: For areas where the leveling feet cannot compensate for the unevenness, use shims to raise the low points. Place the shims strategically to ensure stability.

After making sure the machine is level, screw the floor screws back in counterclockwise to ensure that the floor screws are not stressed for a long time.

Check Leveling Again: After making adjustments, recheck the leveling to ensure that the press brake is properly balanced. Continue adjusting until the machine is level in all directions.

Test Bends: Once you’re satisfied with the leveling, perform test bends on scrap material to ensure that the press brake is bending accurately and consistently.

Regular Maintenance: Periodically check the level of the press brake, as it may shift over time due to usage or changes in the environment. Regular maintenance helps maintain accuracy.

Demostración en vídeo