If you’re aiming to enhance the performance of your DELEM DA-69S Machine Mode, you’re in the right place. I’ll explore key strategies to help you optimize this machine’s capabilities, enabling you to achieve top-tier efficiency in your metalworking operations. Whether you’re a seasoned expert or new to this advanced system, this guide will equip you with the knowledge you need to maximize your machine’s potential.

Introducción

The DELEM DA-69S controller is an integral part of modern prensa plegadora operations, providing advanced functionalities and precision controls that are crucial for shaping and bending metal efficiently. Mastering its machine mode can significantly enhance production efficiency, reduce waste, and improve the overall quality of finished products.

Ensuring Accuracy and Consistency

Using the Protractor for Angle Accuracy

The protractor is essential for maintaining precise bending angles, which are critical in ensuring the quality and uniformity of your metalworking projects. To effectively use the protractor, it must be properly calibrated. Begin by verifying its alignment with a reliable angle reference.

Con este parámetro puede seleccionar un dispositivo de medición de ángulos digital cuando se ha instalado la opción Transportador.

Dispositivo de medición de ángulos

• No utilizado
• Mitutoyo 187-50x
• Mit.187-50x U-WAVE (Displayed if a wireless receiver is detected at start-up)
• Mitutoyo 187-50x IBR
• KEBA KeMes A205 (Displayed if a wireless receiver is detected at start-up)

This device is usable in production modes. Position the cursor in the alpha correction field or the pop-up window’s measured angle field. Press the transmit button on the device; the control will display the received angle. Press enter to accept, and the control will determine the necessary correction.

Auto Enter Corr. α

• Apagado: After measuring, the angle correction shows on the screen. The operator must select the correction field and press enter to apply it.
• En: The correction field is auto-selected. The correction from the measured angle is calculated and applied without manual input on the DA-control.

Tolerancia de ángulo

Defines the maximum deviation allowed between the programmed and measured angles. If the deviation is too large, an error message will appear. With ‘Auto enter corr. ’ on, large deviations prevent automatic correction.

Cálculo de ángulos

• 180-α: Measured as the supplement of the actual product angle.
• α: Measured as the actual product angle.

Regular calibration and utilization of the protractor help in maintaining accuracy across multiple projects.

Event Logging for Tracking Machine Performance and Errors

Event logging is a powerful tool for tracking machine performance and identifying errors that could compromise efficiency. It enables operators to monitor the health of the DELEM DA-69S and preemptively address issues. To leverage event logs effectively, access them through the machine’s interface, interpret any anomalies, and apply insights to troubleshoot or optimize system performance.

Setting Parameters

Event logging allows the registration of specific events on the control panel, storing them in text files for later review. These log files are beneficial for production management.

This page contains all parameters for the event logging function. The events that are logged can be assigned with the parameters on this page.

Event Logging: Toggle the event logging function on or off.

Nombre del archivo: Enter a desired name for the log file; it will automatically have a ‘.txt’ extension added.

Path: Choose the directory for storing the log file, which can be on the DA-control’s internal memory, a USB stick, or a network drive. Use the Select Path function to choose the location.

Tamaño máximo de archivo: Set a maximum log file size in kilobytes. When reached, the log file is renamed and closed, and a new one is created to continue logging.

The following parameters determine which events to log, and at least one must be activated:

Inicio del controlador: Logs when the control is started.

Parada del controlador: Registra cuando se detiene el control.

Cambio de paso: Logs when the control advances to the next bend step.

Producto completo:
Logs when the final step of a bend program is completed.

Cambio de modo: Registra cuando se selecciona un modo diferente.

Mensaje de error: Logs when an error message appears.

Understanding Explanatory Notes

Proper configuration of machine parameters is paramount. Familiarize yourself with the various settings and consult the explanatory notes within the system. These notes provide critical insights and understanding of how changes impact operations, ensuring that you’re making informed adjustments for optimal performance.

In DELEM DA-69S Machine Mode logs, the timestamp is formatted as

<log time=”20100129T122021.477″ event=”mode” mode=”1″/>

o:

<log time=”20100129T122034.464″ event=”start” prod=”EVENTLOG” step=”1″ stock=”32767″/>

The date follows the sequence of year-month-date, and the time follows hours-minutes-seconds-milliseconds, separated by a ‘T’. This precise timekeeping is crucial for accurate tracking of events.

Event Nature and Attributes: The log entry describes an event’s nature using a specific keyword, with associated attributes depending on the event type. Several event types are possible:

• Mode Change (mode): Signifies a change in the machine mode, with the mode attribute indicating whether the machine is in manual (1), programming (2), automatic (3), or step-by-step (4) mode.
• Step Change (step): Logs changes related to a specific bend step, including the product ID and step number.
• Control Start/Stop (start/stop): Marks the start or stop of a control process, detailing the product ID, step number, and stock counter.
• Product Complete (prod_rdy): Indicates a completed product with its ID and stock count.
• Error Message (error): Captures errors with a specific error number for troubleshooting the DELEM DA-69S Machine Mode.

Attribute Keywords: Attributes within the log entries use keywords like modo, paso, prod, stock, y error to detail the specific characteristics of an event.

Log File Size Management: Each log line is around 50 bytes. With a 10 KB file size, roughly 200 events can be stored. For extensive event tracking, using an external USB or network storage is recommended, as the control system supports a maximum file size of 1 megabyte (1000 KB).

To effectively utilize the DELEM DA-69S Machine Mode, understanding and managing these log files is vital. This enables better tracking of operations and aids in maintaining optimal machine performance.

Maintenance and System Optimization

Regular Maintenance Routines for Optimal Machine Performance

Adhering to a regular maintenance routine ensures that your DELEM DA-69S operates at peak performance. Daily checks might include cleaning the machine surfaces and inspecting moving parts, while weekly tasks can involve more detailed examinations of the system mechanics. Consistent maintenance minimizes downtime and prolongs the lifespan of your equipment.

On the maintenance tab of the DELEM DA-69S Machine Mode, various maintenance-related functions are available. This includes the machine hour counter, machine stroke counter, and tools for module replacement and diagnostic data storage.

Horas
This displays the total running hours of the machine.

Accidentes cerebrovasculares
Shows the total number of strokes executed by the press beam.

Modo de registro
You can activate or deactivate logging mode for service purposes using a special code. To activate logging, contact the machine manufacturer for access information. Deactivate by entering code “0”.

Pantalla de bloqueo
Use the Lock Screen function to prevent changes while cleaning the screen. Unlock by pressing the STOP button.

Crear archivo .dat
The Create .dat-file function saves critical product and control data, typically on a connected USB stick, useful for maintenance support.

Reemplazar módulo
Easily exchange an axis module using the DELEM DA-69S Machine Mode’s exchange procedure. This is only available when applicable.

Exchange Procedure:

1. Switch off the DA-control and disconnect the module to be replaced.
2. Connect the new DM-module of the same type and power on the machine.
3. An error with the original module ID appears.
4. Select Machine mode, then go to the Maintenance tab.
5. Tap Install Module.
6. Confirm replacement in the window that appears by tapping Yes.
7. The control reboots to initialize the new module, updating software automatically if required.

Reiniciar el controlador
This function restarts the application to refresh the system.

Scheduled Maintenance (optionally available)

In the DELEM DA-69S Machine Mode, implementing a scheduled maintenance plan offers significant benefits, including minimizing unexpected breakdowns and ensuring smooth production operations. Scheduled tasks, enabled by the manufacturer, appear based on time or machine usage (such as strokes) to guide users in conducting essential maintenance.

Depending on each task, maintenance can be self-performed or done by a service technician. Users should consider setting maintenance intervals—monthly, quarterly, or annually—based on usage intensity to carry out thorough maintenance activities like lubrication, system checks, and calibration adjustments. The maintenance schedule allows users to view the status of each task and mark them as completed, either with or without a specific code, ensuring the DELEM DA-69S operates efficiently and reliably.

Accessing System Information for Troubleshooting and Updates

For effective troubleshooting, knowing how to access the DELEM DA-69S system information is vital. Retrieve system data through the control interface, which can help identify issues and improve performance. Additionally, keep the system software updated for enhanced functionalities and to benefit from the latest improvements.

On this tab, system information for the DELEM DA-69S Machine Mode can be found. It includes version information on the software and IDs of installed modules as well as OEM-specific file versions. Additionally, software update functionality is also available. This screen provides detailed information about the control system, which is useful for service purposes.

Solicitud: Displays the version of the current DELEM DA-69S application.

ID de opción: Shows the unique option ID of the DELEM DA-69S control.

Secuenciador: Indicates the version number of the running sequencer in DELEM DA-69S Machine Mode.

Mesa KO: Provides the KO-table number and description specific to the DELEM DA-69S.

Espacio en disco: Details the available and total user disk space on the DELEM DA-69S system.

Actualizar software: The Update Software function allows the DELEM DA-69S control to install a software update from a USB stick. The directory browser helps select the desired update and initiates the installation process.

Sistema de respaldo: The Backup System function creates a complete system backup to a USB stick. A unique timestamped file is written, holding DELEM software, OEM-specific data, and user files.

Restaurar sistema: The Restore System function is used to restore a previously made backup in the DELEM DA-69S Machine Mode. Users can select specific items to be restored during the process.

Software sin conexión: The Offline Software function generates an offline software setup file on a USB stick. This setup can be used to update existing offline software, ensuring optimal compatibility with the DELEM DA-69S control software.

Preguntas frecuentes (FAQ)

Conclusión

Optimizing the Modo máquina DELEM DA-69S for better performance involves key steps such as implementing a scheduled maintenance plan, regularly updating software, and performing system backups and restores as needed. By following these guidelines, you can effectively minimize downtime, enhance efficiency, and maintain smooth production operations.

For more comprehensive support or if you have any questions, don’t hesitate to contact our team. Additionally, we recommend exploring our other documentation to gain deeper insights into maximizing the potential of your DELEM DA-69S system.