Blog

There are cases where trouble, such as punch tip breakage and flange fractures, occurs during the punching operation.Often the cause of this trouble is a lack of technical data concerning standard parts, or an error in the selection of the punching tool materialor shape. In order to reduce the incid

The View/ReView Training SystemTraining your employees to operate and setup press brake machinery in a safe and productive manner is easy and effective using HARSLE’s View/ReView Press Brake Operator Training System. It’s a uniquely self-paced program that places the responsibility for learning on t

C) Forming with Bottoming DiesTo obtain better angular consistency, or to compensate for repeatability or deflection problems of the press brake, a forming method called bottoming may be selected (Fig. 3-4). Bottoming often creates problems for the press brake operator. The forming method has four d

Outline• Materials Processing Parameters• Process Description• Mechanisms of Laser CuttingEffect of Power Density• Power density is the key process driver• Power Density (Intensity)= P/pr2

Metal is vital to modern industrial design because of its durability, solidity and strength, but these properties also make it extremely difficult to penetrate. The technique of plasma cutting has become a popular solution, though not an exceptionally accurate one. With plasma cutting, the strongest

The Basic 90º BendPress brake bending falls into two basic categories with several compromise options. The first is the foundation for all press brake work and is called air bending. The second type is called bottom bending.A) Air BendingAir bending is defined as three points of contact with the par

ABSTRACT:-This project work deals with the design of pneumatically controlled small scale punching machine to carry out piercing operation on thin sheets (1-2 mm) of different material (aluminium and plastic). Reduction in punching force requirement being the main aim of this project work is obtaine

STONE Radius

These machines can perform a number of functions, including shearing, punching, notching or bending.On larger machines, operations may be disconnected from the prime mover while it isn’t in use. However, usually the machine in use and a number of tools nearby will operate at the same time. PUNCH AND SHEAR MACHINES.