Views: 89 Author: Site Editor Publish Time: 2019-01-23 Origin: Site
Sheet punching machine, JH21-100T punch equipment, hydraulic punch press manufacturers.
●The machine features fine steel plates welded machine body , tempering treatment ( or vibration relief ) , shot blasting , rigidness , accuracy and stability.
●Vertical located crank shaft , compact structure the crank shaft undergoes grinding treatment after high frequency quenching , which has a good smooth finish and rotates flexibly ; lengthened rectangle hex guideway with a surface of bronze plate , which has high guide accuracy.
●Pneumatic dual balance cylinder , balanced sliding block and punch weight , which reduce impact and noise eliminate the clearance between connecting rod and sliding block , reduce the impacted wear of the steel parts.
●The whole machine adopt PLC centralized control The gas circuits adopt imported safety dualvavle , which can achieve jog , inch , single and continuous punching.
●The key parts such as sliding block , guide ways , worktable plate , connecting rod , and are all castings made in sand , which improved the surface roughness 1-2 level , and improve the size accuracy 2-3 level.
●The 60t-level machines adopt the electrical control device to adjust the die height Fine configuration , the key parts like pneumatic components.electrical components , sealing parts , buttons and etc all adopt imported.
No. | Item | Unit | JH21-100T | |
1 | Nominal Force | KN | 1000 | |
2 | Nominal Stroke | mm | 5 | |
3 | Slide Stroke | mm | 160 | |
4 | Shut Height | mm | 335 | |
5 | Shut Height Adjustable | mm | 90 | |
6 | Throat depth | mm | 330 | |
7 | Column Distance | mm | 670 | |
8 | Table Size | mm | 1060*640 | |
9 | Table Thickness | mm | 145 | |
10 | Blanking hole diameter | mm | 180 | |
11 | Bloster surfance height | mm | 900 | |
12 | Motor | KW | 7.5 | |
13 | Weight | kg | 8650 | |
14 | Dimension | mm | 2000*1300*3010 | |
15 | Air pressure | MPa | 0.5 | |
16 | Times of Stroke | Fixed | times/min | 55 |
Variable | times/min | 35-65 | ||
17 | Slide Surface | Left and Right | mm | 620 |
Front and Back | mm | 520 |