HARSLE Y27-400T deep-drawing hydraulic press adopts a three-beam and four-column structure, which is mainly composed of the machine body, hydraulic system, and control system. The hydraulic station adopts the independent closed control cabinet which is safe and aesthetics, and it is installed with air switches and relays, which greatly improves the safety of the control system; various alarm signals and limit switches of the machine realize program interlock with the machine’s each action so that a failure in one place will stop immediately to avoid damage to other parts; built-in hydraulic pad and guide bar are suitable for deep-drawing and forming of metal products, such as wheelbarrow body, stainless sink pot, etc.
Put deep-drawing oil on both sides of the sheet.
Place the sheet into the mold.
Choose the language.
Enter into the controlling system.
Turn to the SEMI-AUTO.
Press the buttons at the same time.
The slider starts pressing.
The slider retracts after deep-drawing.
Take out the product.
This is all about our Y27-400T deep-drawing hydraulic press machine for wheelbarrow production. Kindly leave us a message if you have any questions about it.