160T/3200 NC Press Brake with E21

HARSLE 160T/200 NC Press brake machine with E21, sheet metal equipment for sale. The hydraulic bending machine includes a bracket, a worktable, and a clamping plate. The worktable is placed on the bracket. The worktable is composed of a base and a pressure plate. The base is connected to the clamping plate by a hinge. The base is composed of a seat shell, a coil, and a cover plate. The coil is placed in the recess of the seat shell, and the top of the recess is covered with a cover plate. When in use, the coil is energized by the wire, and after the electricity is energized, a gravitational force is generated on the pressure plate, to realize the clamping of the thin plate between the pressure plate and the base. Due to the use of electromagnetic force clamping, the pressing plate can be made into various workpiece requirements, and the workpiece with sidewalls can be processed.

●The whole welded machine structure achieves high rigidity; the machine is designed by ANSYS software which can ensure the reliability and precision of the press brake.

●The motors for backgauge and ram stroke are controlled by an inverter, which can achieve high positioning accuracy of the backgauge and ram by changing the frequency and voltage of the motor.

●Different punch and dies are optional according to customers requirements, such as Multi-v die radius die, gooseneck die, etc. One set of complete standard punch and die will be included for free.

●X-axis ( Backgauge ) and Y-axis ( Ram stroke or cylinder stroke ) can be programmed by the E21 system controller, which can store up to 40 groups of programs.

●Side and rear metal safety guard meets European safety standard.

●Hydraulic overload can be protected by an overflow valve, System pressure can be regulated byre switch easily.

●Footswitch with emergency button can stop the machine immediately when an accident happens.