Blog

From the nature of the CNC bending machine synchronization, it can be divided into three types, namely, the torsion axis synchronization, the hydraulic proportional valve synchronization, and the dual servo pump control synchronization.

It can increase the difficulty of rotating the pallet and reduce the rotation direction of large-sized workpieces. One or two operators can easily and stably complete the bending process of the large panel.

The above steps are to assist maintenance personnel in troubleshooting in a simple and easy order. When it is impossible to accurately know the exact fault, it is recommended that the maintenance personnel follow the above steps to check one by one, which can help the maintenance personnel find the source of the fault in the shortest time.

If bending stainless steel, plating plate, etc. do not need to be sprayed or plated, if the flange is too small to use small sipe, groove, the film is lined with film or tape before bending to avoid indentation.

First look at the position and structure of the turret mold. Lower die: The correct height of the lower die is 30±0.5mm. If the size is wrong after sharpening, it can be adjusted by adding a gasket.

In order to realize the automatic production line of stamping, it is necessary to have a complete set of production facilities for punch press, which includes three basic equipment: material rack, leveler and feeder. If you need to receive materials and then install the receiving and winding machine

Why do the four-column hydraulic press machine have an ejection cylinder? If you look closely, you will find that four-column hydraulic press machine has an ejection cylinder. This is because many times when we have processed a product that requires a part to pull the product out of the mold, it is

The security door embossing is used for the front and rear panels of the security door, and the main function is to increase the security strength and aesthetics of the door (Fig. 1). The external dimensions (length × width) of the parts are 2200mm × 520mm, the material is ordinary carbon steel, and

CNC hydraulic shearing machine is a common shearing machine. Let's take a closer look at what it has.The main features of the hydraulic shearing machine are as follows:(1) The hydraulic shearing machine uses a rectangular lower blade and can be cut with four cutting edges to extend the life of the b