Views: 213 Author: Site Editor Publish Time: 2023-11-07 Origin: Site
In the use of the HARSLE press brake machine, some customers contact our after-sale service team that there is a bending angle deviation in the same workpiece. That situation exists in a variety of possibilities, in the case of excluding the existence of wear and tear of the mold and the scale has loosened, we can adjust the Y1 & Y2 reference points to solve the problem, the following details are on how to adjust the Y1 & Y2 reference points in the DELEM system.
We have to adjust the Y1&Y2 reference point according to the actual use. Y1 indicates the left side, and Y2 indicates the right side. The number increases and the bending angle will also increase, the number decreases and the bending angle will decrease, about 0.07mm for 1 degree.
For example, the workpiece sets to be 90 degrees, but the actual result is 90 degrees on the left side, and 91 degrees on the right side, so the right angle needs to be reduced by 1 degree, then we need to adjust the Y2 reference, and the right value should be the old value minus 0.07mm. Bending test again to adjust until the final result meets the requirements.
That's all about today. If you have more questions or you are interested in our machines, please feel free to contact us.