TROUBLESHOOTING & TUTORIAL

Laser cutting process that uses a laser beam to cut materials with high precision. The laser beam is directed onto the material being cut, which causes the material to melt, burn, vaporize, or be blown away by a jet of gas, depending on the type of laser and the material being

Close the laser (MAX laser, first close the button START, and then hit the key to 0FF, and then turn off the red main switch 0FF, Raycus laser, hit the key to 0FF, and then turn off the red main switch 0FF)

Precautions for Safety Protection of Laser Cutting Equipment1. Fire Prevention MeasuresThe laser cutting machine needs to use oxygen when cutting. Smoking should be prohibited in the cutting machine area, especially near the oxygen cylinder, to prevent hidden dangers and unnecessary damage.

This manual describes operation of E21S numerical control device and is meant for operators who are instructed for operation of the device. Operator shall read this manual and know operation requirements before using this device.

1.Install laser cutting machine. After receiving the equipment, check whether the parts are complete according to the delivery list. If the parts are complete and assemble the equipment.2.Assemble the bed, which is divided into the front bed and rear bed,

Hydraulic oil volume for our HARSLE shearing machines refers to the amount of hydraulic fluid required to operate the hydraulic system of machines. The hydraulic system is responsible for providing power and control to various components.