ESA S650 Metal-Working Machine Function is an advanced feature designed to simplify bend programming and improve operational efficiency on ESA press brake controllers. If you are looking for a faster way to create repeated bends or manage Dutch Folding operations, this function can greatly streamline your workflow. In this article, I’ll explain how the ESA S650 Metal-Working Machine Function works, how to enable it, and how features like New Bend creation and Dutch Folding bend forcing can help improve programming speed and bending consistency. Whether you are handling simple parts or complex multi-bend programs, this guide will help you better understand these practical ESA S650 functions.

What Is ESA S650 Metal-Working Machine Function?

Understanding the Purpose of the Function

The ESA S650 Metal-Working Machine Function is a special configuration feature designed to improve efficiency during bend programming and editing. Once enabled, the controller activates two important functions:

• Nueva función de curvatura
• Forzado de curvatura plegable holandés

These tools help operators create bends more quickly, simplify repetitive programming tasks, and support special bending methods directly from the Editor and Summary Bends pages.

Why This Function Is Important

For operators working with complex bending programs, manually entering repeated bend data can consume significant time. The ESA S650 Metal-Working Machine Function reduces repetitive programming work by allowing new bends to inherit data from previous bends automatically.

The Dutch Folding function also improves flexibility by allowing operators to force specific bends into Dutch Folding mode using a simple parameter setting.

Together, these functions help:

• Improve programming speed
• Reduce manual data entry
• Simplify repetitive bending operations
• Increase workflow efficiency

How to Enable ESA S650 Metal-Working Machine Function

Paso 1: Acceda a la página de configuración

To activate the ESA S650 Metal-Working Machine Function:

1. Abrir el Página del editor
2. Press the menu key to open the menu
3. Seleccionar 2 >> Configuration

This opens the system configuration page.

Step 2: Enter the Machine Parameters Page

After entering the configuration menu:

1. Seleccionar 6 >> Machine Parameters
2. Enter the required password
3. Prensa [De acuerdo] to confirm

This allows access to the protected machine parameter settings.

Step 3: Enable the Metal-Working Machine Function

Next:

1. Presione el Parámetros 2 llave
2. Locate the Máquina para trabajar metales field inside the Auxiliary Functions parameter group
3. Enter the value 1

Once this value is confirmed:

• El Nueva función de curvatura becomes active
• El Forced Dutch Folding Bend function becomes active

These functions are immediately available in the Editor and Summary Bends pages.

Understanding the ESA S650 New Bend Function

How the New Bend Function Works

The New Bend Function allows newly created bends to automatically copy all data from the previous bend.

Normally, new bends inherit only general program data. However, when the ESA S650 Metal-Working Machine Function is enabled, the new bend contains:

• Bend angles
• Axis values
• Tooling data
• Parámetros de curvatura
• Position settings

This dramatically reduces repetitive programming work for similar bends.

Creating New Bends with the Next Bend Function

When positioned on the final bend of a section:

• Presione el Next Bend botón

The ESA S650 automatically:

• Creates a new bend
• Copies all data from the previous bend

This feature is especially useful for:

• Repetitive production parts
• Similar bending sequences
• Multi-step programs

Using the Insert Step Function

Operators can also create bends using the Insertar paso función.

To do this:

• Open the menu
• Seleccionar Insertar paso

The newly inserted bend will also inherit the same parameters as the preceding bend.

This improves:

• Programming consistency
• Editing speed
• Workflow efficiency

Important Notes About the New Bend Function

Avoiding Accidental Bend Creation

When the ESA S650 Metal-Working Machine Function is active, operators must carefully use the Next Bend button.

If the cursor is already positioned on the final bend:

• Pressing the Next Bend button again will create additional bends instead of scrolling through existing bends.

This can accidentally add unnecessary bends to the program.

Recommended Navigation Method

To safely navigate through bends:

• Use the standard scrolling button instead of repeatedly pressing Next Bend

This helps prevent accidental program expansion.

Using the New Step Button

If operators want to create bends using the traditional method:

• Utilice el [Nuevo paso] function button

In this case:

• The new bend only inherits general data
• Previous bend parameters are not copied automatically

This provides greater flexibility depending on programming requirements.

Understanding ESA S650 Dutch Folding Bend Forcing

What Is Dutch Folding Bend Forcing?

El Forzado de curvatura plegable holandés feature allows operators to quickly define a bend as a Dutch Folding bend directly from the Editor or Summary Bends page.

This simplifies special bending operations without requiring additional configuration procedures.

How to Activate Dutch Folding for a Bend

To force a bend into Dutch Folding mode:

• Establezca el Ángulo Y1 field value to 0

Once entered, the ESA S650 automatically recognizes the bend as a Dutch Folding bend.

This function is useful for:

• Specialized bending operations
• Avanzado chapa de metal formando
• Non-standard bending sequences

Benefits of Dutch Folding Bend Forcing

Using Dutch Folding bend forcing helps operators:

• Simplify special bend programming
• Reduce manual setup adjustments
• Improve workflow speed
• Handle complex bend geometries more efficiently

This function is particularly beneficial for advanced metal-working applications.

Best Practices for Using ESA S650 Metal-Working Machine Function

Improving Programming Efficiency

To maximize efficiency:

• Use copied bend data for repetitive bends
• Verify automatically inherited parameters
• Monitor bend sequences carefully
• Use New Step when only general data is needed

These practices help improve programming accuracy and reduce setup time.

Preventing Programming Errors

Operators should also:

• Avoid repeatedly pressing Next Bend unintentionally
• Review automatically copied parameters
• Confirm Dutch Folding settings before production
• Save programs regularly after editing

Careful management helps maintain accurate and organized bending programs.

Preguntas frecuentes (FAQ)

Conclusión

The ESA S650 Metal-Working Machine Function is a valuable productivity feature that helps operators simplify bend programming and manage advanced bending operations more efficiently. By enabling the New Bend Function and Dutch Folding Bend Forcing, users can reduce repetitive data entry, accelerate programming workflows, and improve consistency across complex bending programs.

Understanding how to safely create new bends, navigate between bend steps, and apply Dutch Folding settings allows operators to fully utilize the flexibility of the ESA S650 controller. Proper use of these functions can significantly improve programming speed, reduce operational errors, and optimize overall press brake performance.

For additional technical support, advanced programming guidance, or more ESA S650 documentation resources, feel free to contact HARSLE or explore more articles available on our website.