https://www.harsle.com/press-brake/Hydraulic Clamping System for Press Brake can solve clamping issues, improving precision and efficiency in your operations. Discover how this system enhances your press brake performance.

The hydraulic clamping system for press brakes ensures secure, stable, and efficient clamping of materials. This guide will help you understand its benefits and how it enhances press brake performance for better results.

Let’s dive into the mechanics of the hydraulic clamping system and see how it can optimize your press brake’s efficiency.

As an optional solution for our press brake machine tooling, WILA has focused on the R&D of the hydraulic clamping systems and supporting tools of press brake machine for many years, and its quality and service are trustworthy. Customers who have already purchased a press brake machine can also upgrade the clamping system. 

The WILA hydraulic clamping system can tighten the tool in three to four seconds; the hydraulic clamping system is finished with the first installation and commissioning, there is no need to make the alignment again when changing punches&dies later; the punches and dies can be installed on both side and the midline is always aligned; The full tool loading takes only 3 minutes, the punches and dies can be tightened at the same time; The punches and dies can be moved at will. Here we introduce the operations with the WILA hydraulic clamping system.

Punch Replacement

Loosen the Hydraulic Clamping on a Press Brake

To release the hydraulic clamping system on a press brake, start by clicking the soft switch located at the top of the screen. This action will disengage the hydraulic clamping mechanism, allowing the operator to adjust or replace the punches safely. Once the clamping is loosened, the machine will automatically enter a locked state, preventing any operation. Additionally, an alarm notification will appear on the screen, warning the operator that the punches are not properly clamped. This built-in safety feature ensures that the machine cannot be started while the clamping system is disengaged, preventing potential operational hazards and ensuring the safe handling of tooling changes during the bending process.

Press and hold the spring button to remove the punches.

To remove the punches from the press brake, press and hold the spring button to release the locking mechanism. This ensures a secure and controlled removal process, preventing damage to the tooling. Once the button is engaged, carefully slide the punch out of the clamping system. Always ensure that the machine is powered off and that proper safety precautions are taken before handling the punches. This method allows for quick and efficient tool changes, improving workflow and minimizing downtime in metal bending operations. Proper maintenance of the clamping system ensures long-term durability and precision in bending applications.

Install Another Set of Punches in a Press Brake

To install another set of punches on your press brake, first, ensure the machine is powered off for safety. Then, press and hold the spring-loaded button on the clamping system. This will release the existing punch, allowing you to carefully remove it. Next, align the new punch set with the clamping mechanism and slide it into position. Keep holding the spring button while securing the punch, ensuring it fits snugly. Once properly positioned, release the button to lock the punch in place. Finally, check the alignment and perform a test bend to confirm stability before resuming operation.

Punch Clamping

After the punches are all installed, click the soft switch at the top of the screen again and the hydraulic clamping takes effect. The machine can be started normally at this time. That is all for this article and you can get more by the video below.

Video Demo